Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
11/13/2007 3:07:25 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADI060716
DESCRIPTION
Recessed lens wall wash luminaire with 4 inch square aperture utilizing
horizontal BT15 tungsten-halogen lamp. Modular platform can be
reconfigured from below the ceiling to accept a broad range of lamp
modules and optical elements. Platform is suitable for direct contact with
insulation and 2x8 residential construction. Pl element
combination produces smooth vertical illumination with a minimal
downlight component.
Frame
Galvanized steel plaster frame with
integral bar hanger receivers.
Setscrews provide positive
horizontal locking.
Collar
Matte black steel collar adjusts
vertically for 1/2" - 1" thick ceilings
and can be r/- 7.5° thru the
aperture. Integral gun sights
facilitate the use of guide strings or
laser lines. Shipped with a paint
overspray protector installed in the
collar.
Lamp Module
Installed or removed thru the
aperture or from the top and
allows lamp orientation at 0°, 90°,
180° and 270° positions.
Housing
Double wall aluminum housing
painted matte black for a visually
dark interior. Removable hinged
top allows for top access. All
fasteners are captive.
Gaskets
Closed cell gaskets achieve
restrictive airflow requirements
without additional caulking.
Optical Element
Mousetrap type springs pull flange
tight to ceiling. Light trap
eliminates spill light at edge of
flange and reflector. Available in
self-flanged or metal trim ring
versions. May also be installed
rimless using optional plastering
lathing ring.
Bar Hangers
Captive preinstalled bar hangers
adjusts from 8-1/2" to 24" wide;
pass thru feature allows shortening
without removal. Captive nail
penetrates standard and
engineered lumber. Mounting
flange levels platform with ceiling.
Integral clip attaches directly to
t-bar.
Primary Reflector
Miro® segmented upper reflector.
Accepts 75W maximum BT15
tungsten-halogen lamp. Will not
accept a lower efficacy A19 type
lamp.
Lower Reflector
Specular aluminum kicker reflector
integral with angle cut parabolic
shielding prismatoid and glass
spread lens provides smooth
vertical illumination with a minimal
downlight component. Available in
a wide range of semi specular
Alzak® finishes.
Junction Box
(7) 1/2" trade size pry outs, (3)
integral clamps for non-metallic
cable. Rated for (4) #12 thru branch
circuits. Wago® type push wire
connectors for field connections
Thermal Protector
Self-resetting thermal protector
protects against improper lamping.
Lamp Socket
Ceramic E26 Edison base mounted
to lamp module connects to the
platform with electrical quick
connects
Code Compliance
Thermally protected, IP labeled,
cULus listed for protected wet
locations and ASTM-E283 AIRTITE
(tm). Suitable for direct contact
with insulation.
P408ICAT
MH4BT
E4LWW
75W BT15
Tungsten-Halogen
4 Inch Square Lens Wall Wash
4-1/2“
(114mm)
5-3/4”
(146mm)
15-3/4”
(400mm)
10”
(254mm)
7-1/16”
(180mm)
Cutout=5-3/16”
(132mm)
7-7/8”
(200mm)
O R D E R I N G I N F O R M AT I O N :
C o m p l e t e u n i t c o n s i s t s o f p l a t f o r m , l a m p m o d u l e a n d o p t i c a l e l e m e n t .
P408ICAT
= 4” Square
Aperture IC Housing
MH4BT
= BT15
Horizontal
Lamp Module
E4LWW
= 4” Square
Aperture Lower
Shielding Prismatoid,
Lens Wall Wash
Finish
Optical Element
Platform
Lamp Module
Flange
P408ICAT MH4BT
Accessories
[Blank]
= Metal Trim
Ring, Matte White
SF
= Self Flanged
SFWF
= Self Flanged,
Matte White Flange
PLR4x4
= Plaster lathing ring for rimless
RLA4x4
= Rimless adapter for solid ceiling
surfaces
MTR4MW
= Metal trim ring, matte white
MTR4MB
= Metal trim ring, matte black
MTR4SN
= Metal trim ring, satin nickel
MTR4AC
= Metal trim ring, antique copper
MTR4TBZ
= Metal trim ring, tuscan bronze
Alzak Finishes
H
= Clear Haze
WMH
= Warm Haze
WHH
= Wheat Haze
Painted Finishes
MW
= Matte White
MB
= Matte Black
BH
= Black Haze
KH
= Cognac Haze
GPH
= Graphite Haze
CTH
= Cobalt Haze
CCH
= Chocolate Haze
IRIS
®
