background image

 
 

number 

Cordless Rechargeable Saw

 

10246 

Instructions 

 

v1.0: 25.11.15 

 
 

 

Before use  
 

 

Read all safety warning and all instructions before use. 

 

The term “power tool” in this manual refers to you rechargeable saw. 

 

Keep work area clean and well lit. 

 

Always check for damage prior to using the power tool. Any damage should be repaired properly by a 
qualified service engineer. If experiencing any difficulty consult your local dealer. 

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience or knowledge, unless they have been given  
supervision or instruction concerning use of the appliance by a person responsible for their safety. 

 

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, 
gases or dusts. Power tools create sparks which may ignite dust or fumes. 

 

Keep children and bystanders away while operating a power tool. Distractions can cause accidents. 

 

To protect against electric shock, do not immerse cord, plug or appliance in water or any other liquid. 

 

The use of accessory attachments is not recommended, may cause injuries, and invalidate any 
warranty you may have. 

 

Keep tools clean and well maintained. Check for any damage before use.  

 

Use the tool and parts in accordance with these instructions. 

 

Do not force the power tool. Use the correct power tool for your application. The correct tool will 
help to do the job better and more safely. 

 

Do not use the power tool if the switch does not turn off and on. This must be repaired before further 
use. 

 

Disconnect the plug from the power source and/or the battery pack from the power tool before 
making any adjustments, changing accessories or storing the tool. 

 

Store tools out of the reach of children. 

 

Do not use this appliance for any other use than the intended use it is designed for. 

 

Take care not to drop the appliance as heavy impacts may cause internal damage. 

Summary of Contents for 10246










Reviews: