IMPORTANT:
The accuracy of the door preparation is critical for the proper functioning and security of this lever
handle lock. Misalignment can cause premature wear and a lessening of security.
(4)
Attention Installer
Please read these instructions carefully to prevent
missing important steps.
Please note:
Improper installation may result in
damage to the lock and void the factory warranty.
Installation Instructions
Grade I Key-In-Lever
Cylindrical Lockset
CL3500 Series
(1)
TEST OPERATION:
Rotate levers to see that latchbolt moves freely.
DO NOT FORCE.
If lockset does not operate properly, remove lockset from door and check
door preparation.
FM 237
10/05 617417570
In U.S.: Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037-4004
www.corbinrusswin.com
Technical Product Support:
Phone: 888-607-5703
Fax: 800-659-7293
In Canada: Yale-Corbin Canada LTD.,
6940 Edwards Boulevard,
Mississauga, ONT L5T 2W2
www.yalecorbin.on.ca
LEVER STILE
REMOVAL
INSTALL
Push / Turn Button
Hold in button,
push release tool into
release hole,
remove lever
Push button in,
slide lever on.
Make sure lever
will not pull off
Plain Lever
Push release tool
into release hole,
remove lever
Slide lever over
lever catch
pull on lever.
Make sure lever
will not pull off
Cylinder Lever
Rotate key 45° clockwise
(from shed position),
Push in release tool into
release hole, remove lever
Insert key and rotate
45° (from shed
position), slide lever
on.
Make sure lever
will not pull off
Interchangeable Core Lever
Remove cylinder and
tailpiece, (see page 3)
Use flat blade screwdriver
to pull back lever catch,
remove lever
Slide lever over
lever catch
Make sure lever
will not pull off
Lever Removal and Installation
LEVER CATCH
(Move in direction of arrow)
LEVER
ROSE
RELEASE
TOOL
RELEASE
TOOL
RELEASE
TOOL
C
A
B
A
Install Latchbolt
1
2
B
Install Lockbody
3
C
Install Inside Trim
4
5
6
BH MA
C E R T I F I E D