background image

Viper 4 Flavor Plumbing Installation Instructions

© 2008-2014, Cornelius Inc.

- 1 -

Publication Number: 629096929INS

INSTALLATION INSTRUCTIONS

S

AFETY

 I

NSTRUCTIONS

!

WARNING

:

Before starting installation, read and understand all safety label and warnings on the machine. Also review and 
understand all safety instructions in the owners, installation and service manuals.

Failure to comply could result in serious injury, death or damage to the equipment.

Q

UALIFIED

 S

ERVICE

 P

ERSONNEL

!

WARNING

:

Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.

All wiring and plumbing must conform to national and local codes. Failure to comply could 
result in serious injury, death or equipment damage.

S

AFETY

 P

RECAUTIONS

This unit has been specifically designed to provide protection against personal injury. To ensure continued 
protection observe the following:

!

WARNING

:

Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all 
power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

!

CAUTION

:

Always be sure to keep area around the unit clean and free of clutter.

Failure to keep this area clean may result in injury or equipment damage.

Revision Date: April 1, 2014

 www.cornelius.com

Revision: F

Summary of Contents for VIPER 4 FLAVOR

Page 1: ...nit All wiring and plumbing must conform to national and local codes Failure to comply could result in serious injury death or equipment damage SAFETY PRECAUTIONS This unit has been specifically designed to provide protection against personal injury To ensure continued protection observe the following WARNING Disconnect power to the unit before servicing Follow all lock out tag out procedures esta...

Page 2: ...ty to the unit when it is being moved WARNING The above listed mounting bolts must be installed and the wheels extended and locked in the outboard position prior to moving the unit Failure to comply could result in serious injury death or equipment damage Parts List Table 1 Part No Description Quantity UOM 08859 Tie Cable 11 Std Dennison 10 ea 174292000 Tubing Flexcor 375 X 610 200 ft 174478000 Tu...

Page 3: ...ws water from a common source filter system The FCB machine must be supplied with water to the specification above at all times even when any of the other equipment is drawing water If the operation of the other appliances reduces the flow rate of water to this FCB unit below 2 5gpm 150gph add the required water booster WARNING Secure the CO2 cylinder in an upright position with a safety chain to ...

Page 4: ...erage Tubing 1 4 Inch Beverage Tubing 3 8 Inch Tygon Tubing A B C D E F 1 2 Inch Hose Barb to 3 4 NPT 1 4 Inch Female Flare Nut Direct Connection to Syrup Outlet on Syrup Pump Direct Connection to CO2 Inlet on Syrup Pump Direct Connection to Syrup Inlet on Syrup Pump Inch Tee Barb Water Inlet Syrup Line 1 Syrup Line 2 CO2 Inlet BIB Syrup BIB Syrup BIB Pump C E D G Max 6 Feet BIB Pump C E D BIB Pum...

Reviews: