TOOL CABINET
OPERATING INSTRUCTIONS
Top Chest
Make sure to close all drawers at first. To lock the unit with door, insert
the locating tab of the door into the metering hole and turn left the key.
To lock the unit without door, close lid and turn left the key.
To unlock the unit with door, turn right the key and put the door up. To
unlock the unit without door, turn right the key and slide drawer out.
Intermediate Chest and Roll Cabinet
Make sure to close all drawers at first. To lock the unit with door, draw
out the door and turn left the key. To lock the unit without door, turn left
the key.
To unlock the unit with door, turn right the key and open the door at first.
To unlock the unit without door, turn right the key and slide drawer out.
Do not slam the drawers as they
will not lock, and damage may
occur to lock bar tabs or lock
pockets.
Should damage occur, remove the
drawers (following steps below).With
a screwdriver or pliers straighten out
Figure 1
the damaged tabs or lock pockets. (a):Lock Bar Tab , (b):Lock Pocket
To unlock the unit, turn right the key and slide drawer out.
If it becomes necessary to remove drawers, follow these
drawer removal instructions:
