1
2019.01
Covington Engineering designs machines with safety in mind. Please read our Safety Demands Sheet carefully
and follow for your safety and the safety of others.
ELECTRICAL
Have your licensed electrician electrically ground your machines and equipment (against electrical shock) by
complying with federal, state, and local laws. Locate electrical and in-line switch or switches so operator can
immediately shut them off in an emergency.
DO NOT
allow more than one person to operate a machine, unless you have a switch for each person, which is
wired so that any one of the switches will stop the machine in an emergency.
Keep children, visitors, and pets away from electrical devices and machinery.
DO NOT
work in wet environments where electricity is present.
DO NOT
plug into electricity until the motor switch is off and the proper voltage is supplied.
DO NOT
leave motors running when not in use.
DO NOT
wear jewelry or rings around electricity.
Keep all electrical cords away from moisture, rain, and moving parts.
Periodically check all cords for worn or frayed spots and replace or repair to code if needed.
Thermally protected motors will stop if overloaded. When they cool, they will start automatically without warning.
If the motor stops, shut the switch off for your protection.
715 West Colton Avenue
Redlands, CA 92374
Toll Free: (877) 793-6636
Phone: (909) 793-6636
admin@covington-engineering.com
www.covington-engineering.com
Owner’s Manual For
Vertical Sanders
464WBS - 466WBS - 760WBS - 761WBS - 764WBS
(Also applies to 220V, 50Hz International Models)
Packet Contents:
• Safety Demands
• Instructions
• Schematic
Important Safety Demands For Sanders
Summary of Contents for 464WBS
Page 7: ...7 2019 01...
