© 2007 CRANIUM, INC. ALL RIGHTS
RESERVED. CRANIUM CHARACTER
ILLUSTRATIONS © 1998, 2001
TM
.
THE FOLLOWING
ARE TRADEMARKS OR REGISTERED
TRADEMARKS OF CRANIUM,
INC. IN THE U.S. AND/OR OTHER
JURISDICTIONS: CREATIVE CAT,
DATA HEAD, EVERYONE SHINES, STAR
PERFORMER, SUPER FORT, WORD
WORM, THE CRANIUM LOGO, AND
THE BRAIN LOGO. WE PACK EVERY
CRANIUM TOY WITH A VARIETY OF
OUTRAGEOUS ACTIVITIES. IT’S UP
TO YOU TO USE CAUTION, PLAY IT
SMART, AND HAVE FUN.
long side
top fl ap
bottom fl ap
short side
circle tab
rectangle tab
door (1)
connector (1)
For even more fun, visit
cranium.com
!
6. Now climb in and make someone giggle. Have fun!
7. Look on the back of this sheet for more tunnels to make!
IN THE BOX
2. To make a straight tunnel, line up the three segments:
•First segment: circle tabs facing you
•Second segment: rectangle tabs facing you
•Third segment: circle tabs facing you
Your tunnel will look like this:
3. Put the segments together:
•
Connect the top and bottom fl aps of the fi rst segment to the body of the
second segment.
•Connect the fl aps of the second segment to the body of the third segment.
Your tunnel will look like this:
tunnel segment (3)
KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM THIS FABRIC.
This material meets CFR 1610 specifi cations for fl ame resistance. It is not
fi reproof. This fabric will burn if left in continuous contact with any fl ame
source. The application of any foreign substance to the fabric may render the
fl ame-resistant properties ineffective.
NOT MACHINE WASHABLE.
Clean only with a warm, damp cloth.
GET STARTED!
1. Untie each tunnel segment.
Find the rectangles on the
long side of each segment.
Find the circles on the short
side of each segment.
4. Attach the door. Your tunnel is done!
5. Connect your tunnel to Super Fort! Wrap the
connector around a tube, then attach the
tunnel fl ap to the connector.
Welcome to Cranium
Twisty Tunnel
Create fun tunnel spaces...crawl to new places!
®
