oXYgen Scanning Application - User Guide Addendum
5
iQsmart Hardware
This section of the addendum documents the new and updated functions and
features of the scanner hardware, organized under the following topics:
•
Power up/shutdown
•
Startup sequence
•
Operating panel
•
Light Table
•
Base glass
•
Masks
•
Mounting originals in the scanner
Power Up/Shutdown
1. Turn on your Macintosh computer.
2. Turn on the scanner by switching on the Main Power switch on the back of the scanner.
Figure 1:
Main power switch on back of scanner
3. Press the Power button on the operating panel. The Power LED is green. The Status LED is
orange for a few seconds.
