background image

DO

 

GUIDE

TT-100 Series 

Crestron Connect It™ Cable Caddy

DO

 Install the Device

The TT-100 Series is designed for installation into a conference table.  
The required thickness of the table is 1/2 inch (13 mm) to 1-1/4 inches  
(32 mm).

NOTE

:  The TT-100 Series includes the TT-100, TT-101, TT-110, and TT-111. 

The TT-101 consists of the TT-100 plus HDMI

®

, VGA, audio, and Ethernet 

cables. The TT-111 consists of the TT-110 plus HDMI, VGA, audio, and 
Ethernet cables. The TT-100, which provides a power outlet, is shown for 
illustrative purposes throughout the remainder of this guide. 

To install a TT device, do the following:

1. Properly protect the surface of the table.

2. Using a 4-inch (102 mm) hole saw (not included), drill a hole in the 

appropriate location in the table.

3. With the TT device positioned so that the Crestron

®

 logo faces the 

user of the device, insert the body of the device into the hole.

4. Twist the included locking ring onto the body of the TT device, leaving 

a 1/8-inch (4 mm) gap between the locking ring and the bottom 
surface of the table.

5. Using the included Allen wrench, tighten the three setscrews (included 

with the locking ring) to secure the locking ring to the bottom surface 
of the table.

6. Route the desired cables from the bottom of the TT device through 

the cable opening. Up to four cables can be routed: one HDMI cable, 
one VGA cable, one audio cable, and one Ethernet cable (all cables 
supplied with the TT-101 and TT-111).

7. Insert the cables into the appropriate holes in the included cable plate.

8. Seat the cable plate in the cable opening, and then attach the plate 

using the four supplied Phillips pan head screws.

DO

 Connect the Device

Connect the device as required for the application.

NET/USB Port Connection

NET and USB ports are located on the bottom of a TT device.

Use either the NET port or the USB port of a TT device to communicate 
with a compatible DigitalMedia™ device:

 

• The NET port requires a Cresnet

®

 control cable (not included) to 

connect to a Crestron control system.

NOTE

:  When the NET port of the TT device connects to a control 

system, the TT device receives power via the NET port.

 

• The USB port, which is a USB Type mini-AB port, requires the 

included A to mini-B cable or B to mini-A cable to connect to the USB 
port of a compatible DigitalMedia device.

NOTE: 

For proper USB functionality, the appropriate USB cable must 

be connected to the TT device before the device is powered on.

The USB cable to be used depends on the USB type (Type A or  
Type B) of the DigitalMedia device:

 

– When an A to mini-B cable connects the USB port of a 

DigitalMedia device to the USB port of a TT device, the TT device  
receives power via the USB port. Compatible DigitalMedia 
devices that connect to a TT device using an A to mini-B cable 
include the DMPS3-4K-150-C, DM-MD8X1-4K-C, HD-MD8X1-4K, 
and DM-TX-401-C. The DigitalMedia devices have USB Type A 
host ports, which supply USB power.

 

– When a B to mini-A cable connects the USB port of a 

DigitalMedia device to the USB port of a TT device, the TT device 
receives power via a connection to a Cresnet network or power 
supply. A compatible DigitalMedia device that connects to a  
TT device using a B to mini-A cable is the DM-TX-201-C.  
The DM-TX-201-C has a USB Type B device port, which does  
not supply USB power. 

HDMI, VGA, Audio, and Ethernet Cable Connections

Connect HDMI, VGA, audio, and Ethernet cables as required for the 
application:

 

• Connect one end of the HDMI/VGA/audio cable to the appropriate 

output port of an audio/video source (for example, a laptop) and the 
other end of the cable to the corresponding input port of a compatible 
DigitalMedia device.

 

• Connect one end of the CAT5e Ethernet cable to a local network 

device and the other end of the cable to the building network.  

DO

 Check the Box

QUANTITY

PRODUCT

COLOR

PART NUMBER

1

Cable, USB 2.0, A - Mini B, 6' 6" (2 m)

Black

2025146

1

Cable, USB 2.0, B - Mini A, 6' 6" (2 m) 

Black

2038104

1

Connector, 4-Pin 

2003576

1

Tool, 3/32" Allen Wrench 

2036829

TT-100-B-T,  TT-101-B-T, TT-110-B-T, and TT-111-B-T  Only

1

Cable Plate 

Black

2036696

1

Locking Ring 

Black

4519116

4

Screw, 6-32 x 1/4", Pan Head, Phillips 

Black

2007215

TT-100-GRY-T, TT-101-GRY-T, TT-110-GRY-T, and TT-111-GRY-T Only

1

Cable Plate 

Gray

2036697

1

Locking Ring 

Gray

4519209

4

Screw, 6-32 x 1/4", Pan Head, Phillips 

2007213

TT-101-B-T, TT-111-B-T, TT-101-GRY-T,  and TT-111-GRY-T Only

1

Cable, Audio, Stereo, 1/8" Mini, 6' (1.83 m) 

2037179

1

Cable, Ethernet, CAT5e, 7' (2.13 m) 

2030114

1

Cable, HDMI, 6' (1.83 m) 

2037173

1

Cable, VGA, 6' (1.83 m) 

2037178

Not Included:  4-Inch (102 mm) Hole Saw; Phillips Screwdriver; and HDMI, VGA, Audio, and Ethernet Cables (Model Dependent)

24:

  Power, 24 Vdc (Red)

Y:

  Data (White)

Z:

  Data (Blue)

G: 

Ground (Black)

NET

24 Y  Z  G

NET 
Port

USB 
Port

Cable 

Opening 

TT-100

TT-110

Table 

(User Side) 

Setscrews 

(3)

Table

(Bottom View)

HDMI

Audio/

Ethernet

Audio/

Ethernet

VGA

Phillips Pan Head 

Screws (4)

Cable 

Connections 

(Up to 4)

Table

Locking Ring

1/8 in 

(4 mm)

Reviews: