background image

Operation Manual

180MA

Obtaining Other Language Versions:

 To obtain information in another language about the use of this product, please contact your 

local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible 
situation which may arise during installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have 
occurred. To obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Crown Audio and Amcron are registered trademarks of Crown International. Other trademarks are the 

property of their respective owners.

Some models may be exported under the name Amcron.

®

©2007 by Crown Audio

®

 Inc., 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8200

137783-7D

12/07

Commercial Audio Series 

280MA

1160MA

Summary of Contents for 1160MA

























Reviews: