background image

Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: 574-294-8200
FAX: 574-294-8FAX
www.crownaudio.com

SST-SBSC
4632T

7/05                                                           132290-5B   

S Y S T E M   S O L U T I O N   T O P O L O G I E S

Crown’s Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifi er 
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your 
new Crown amplifi er product is warranted to meet or exceed original specifi cations for the fi rst 
three years of ownership. During this time, if your unit fails, or does not perform to original 
specifi cations, it will be repaired or replaced at our expense. About the only things not covered 
by this warranty are those losses normally covered by insurance and those caused by intentional 
abuse. And the coverage is transferable, should you sell your unit.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside 
of the USA, please contact your authorized Crown distributor for warranty information or call 
574-294-8200.

Specifi cations subject to change without prior notice. Latest 
information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown 
International. Other trademarks are the property of their 
respective owners. Printed in U.S.A.

© 2005 Crown Audio

®

, Inc.

Frequency Response

T

he Crown SST-SBSC 4632T is a custom 
three-channel crossover network with CD-
horn equalization and summed low-

frequency output specifi cally designed for use 
with JBL model 4632T ScreenArray

®

 cinema 

speaker systems installed in cinemas, studio 
production and post-production environments.

SST (System Solution Topologies) modules 
install into the back of Crown SST-compatible 
amplifi ers, saving rack space and simplifying 
system wiring.

For more details about the Crown      
SST-SBSC 4632T, contact Crown Technical 
Support at 800-342-6939 or 574-294-8200. 
Also, visit the Crown Audio website at 
www.crownaudio.com.

Specifi cations

Performance

Frequency Response:

 See graph.

Signal to Noise (A-Weighted):

 Better than 85 

dB below rated power.

Input Impedance:

 20 k ohms balanced, 10 k 

ohms unbalanced.

Output Impedance:

 600 ohms balanced.

Total Harmonic Distortion (THD):

 1 kHz rated 

power, less than 0.1% THD.

Crosstalk:

 > 50 dB from 20 Hz to 20 kHz.

Maximum Output:

 +18 dB into 600 ohms.

Connectors

Input:

 Neutrik

®

 Combo jacks.

Output:

 Removable balanced terminal block.

Features

•   High-quality crossover and CD-horn EQ 

module designed specifi cally for use with JBL 
model 4632T ScreenArray

®

 cinema speaker 

systems

•  High-frequency (HF) signals are internally 

routed to the Channel 2 amplifi er input, and 
mid-frequency (MF) signals are routed to the 
Channel 1 amplifi er input

•   Low-frequency (LF) signals are routed from 

Output B to an external amplifi er

•  SST modules install into the back of your ampli-

fi er, saving rack space and simplifying system 
wiring

• Neutrik

®

 Combo jacks for balanced input con-

nection

•  Removable terminal block jacks for balanced 

output to other components

•  SST Modules add fl exibility by allowing you to 

tailor your Crown Contractor (CH/CL) Series  or 
CE Series  amplifi er to your application

DETAIL SHOWING NO CENTER GROUND CONNECTION

System Block Diagram

Reviews: