Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to
ensure your Hook Over Door Towel Rack is fitted safely and retains its high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following product:
QM261141 Hook Over Door Towel Rack with Rust Free Chrome
Home Safety Advice
• Do not strike the product with hard or sharp objects.
• Do not use the product as a grab rail.
•
The adhesive pad (optional) is suitable for use on most flat, finished surfaces, such as gloss
paint, tiles, polished stone, laminates and mildly textured surfaces.
•
The adhesive pad (optional) is not suitable for use on unfinished material, such as brick,
blockwork and loose, flaky surfaces.
•
Do not use the adhesive pad (optional) on decorative wall paper finishes as these will be
damaged on removal.
• Do not overload the towel rack - 4 dry towels maximum.
• Do not position pad over uneven grout lines.
Product Care
•
To retain the best quality finish, clean product regularly with a soft cloth and mild detergents.
• Do not use abrasive or chemical cleaners as these may damage the product.
•
Spray cleaning liquids onto the cloth and not directly onto the product.
Fitting instruction - Hook over door
1. Determine desired location for the towel rack on the door.
2. Hang the two hooks supplied onto the door.
See Fig.1
(Note: For a more perminant fixing
the over door hooks can be screwed directly into the top of the door using countersink wood
screws. Countersink wood screws are NOT provided.)
3. Hang the towel rack onto the hooks to complete the assembly. (In order to provide a more
secure fixing and to prevent the towel rack levering away from the door an optional adhesive
pad can be fitted to the base of the towel rack -
See Fig.2
)
Fitting instruction - Screw to wall
1. Determine desired location for the towel rack on the wall surface.
2.
With a pencil mark through the holes in the frame, ensuring the towel rack is level.
3.
Using suitable wall fixings (NOT SUPPLIED) that are compatible with your wall surface, drill
and secure the towel rack into position to complete the assembly.
Please refer to the following safety advice if securing this product directly onto a wall surface.
1. Always check for hidden cables and pipework before drilling and take extreme care if there is
any water in the working area.
2. It is advisable to use a residual current circuit breaker (RCCB)
3. Always wear suitable eye protection when drilling.
P.T.O
1
Hook Over Door Towel Rack
WMA 081 R02
