QUICK REFERENCE OPERATION GUIDE
2.
Carefully lift and remove the storage hub
from the work bowl.
1.
With the work bowl on the base, use the
handle to turn the bowl clockwise to lock it
into position.
5.
Place work bowl cover onto work bowl, with
the feed tube just to the right of center.
Turn clockwise to lock onto work bowl.
Align pusher with the feed tube
opening on the work bowl cover
and slide down to the bottom.
Plug in the housing base. The
machine is now ready for use.
6.
Add ingredients to the work bowl,
either through the feed tube or directly
into the bowl. Press the Low, High or Pulse
paddle. The white LED light will illuminate and the
motor will start. Press the Off paddle when finished.
4.
Using the reversible slicing and
shredding discs:
Insert the stem adapter
without the metal blade. Choose the
desired disc and carefully place disc over stem
adapter, with the side being used facing up.
3.
Using the metal chopping/mixing/
dough blade:
Carefully place the blade
onto the stem adapter. Holding top of
stem adapter, lift and place over the work bowl
accessory adapter. Blade should rest on the bottom
of the work bowl.
