background image

Gravity Filter 

Installation Guide and Technical Information 

Thank you for purchasing a  Gravity  Filter  system.  Your Gravity  Filter  comprises an 
upper  chamber  where the filter cartridges  are  located and  a lower  chamber where the 
purified water is stored. 

The  GS2 has  two  filter cartridges  and  the GS4 has  four  filter cartridges. The  more 
filter cartridges  your  gravity  filter system  has,  the faster the flow and  the higher  the 
volume  of purified water. Your purchase of a Water Filter will help  protect you from  water 
borne  disease. The filter uses ceramic filter cartridges, which trap pathogenic bacteria – 
the main causes  of diseases such as dysentery, cholera, bilharzia and typhoid, etc. 

It  is important  that anyone  using  a filter system  takes time to study  this guide  as it 
contains essential information needed to ensure easy  installation and  trouble-free use. 

Follow the instructions and, after installation, your system will produce purified water. 

Keep  this  guide  in a safe  place. It  will enable you to get the best performance from 
your system now and in the future.

Section One

Principal components 

Section Two

Installation 

Section Three

Operating instructions and Maintenance 

Section Four

General information 

www.ItDoesTheJob.com  I  020 8539 4707  I  info@itdoesthejob.com

ItDoesTheJob.com Ltd, Carlton House, Aylmer Road, London, E11 3AD

E&OE

Summary of Contents for GS2

Page 1: ...ges which trap pathogenic bacteria the main causes of diseases such as dysentery cholera bilharzia and typhoid etc It is important that anyone using a filter system takes time to study this guide as it contains essential information needed to ensure easy installation and trouble free use Follow the instructions and after installation your system will produce purified water Keep this guide in a saf...

Page 2: ...of the filter components does not occur during assembly of the Water Filter Fit KNOB 1 onto the LID 2 and insert SCREW 12 through the hole in the LID 2 screw on the KNOB 1 by hand only 3 Push the sealing WASHER 5 over the threaded section of the CANDLE 4 MOUNT 4 Place the CANDLE S 4 into the holes in the UPPER SECTION 3 Secure the CANDLE S into the UPPER SECTION 3 by screwing the CANDLE WING NUT 6...

Page 3: ...at 12 monthly intervals Warning In some cases the Cartridge media can become lodged at one end Upon contact with water this media will expand and can split the cartridge To prevent this shake cartridge horizontally before use Sanitising the system 1 Place 3 Puritabs disinfecting tablets in the upper housing with the cartridge s 2 Fill the system with water 3 Allow to stand for 40 minutes 4 Now emp...

Page 4: ...ou have any difficulty in installing the filter or maintaining the filter you may find the following useful 2 1 No Water a Check that the dispenser tap is open b Ceramic filter elements may be blocked with sediments take out filters and clean 2 2 Low water flow a Check that you have removed all the wrapping from a new filter cartridge b During use low water flow may be an indication that the filte...

Reviews: