background image

 

 
 
 
 

 
 

Before Your Begin 

This Quick Installation Guide gives step-by-step instructions for setting up the D-Link 
DGS1216T Gigabit Smart Switch. The model you have purchased may appear slightly 
different from those shown in the illustrations. For more detailed information about the 
switch, its components, making network connections and technical specifications, 
please refer to the User’s Manual on master CD included with your switch. 

Check Your Package Contents 

These are the items included with your DGS-1216T purchase: 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

If any of the above items are missing, please contact your reseller. 
 
 

©2006 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective 
holders. Software and specifications subject to change without notice. 

 

• 

DGS-1216T

D-Link 16-Port 10/100/10 2 Combo 
Mini GBIC Gigabit Smart Switch 
 
 
• CD-ROM (containing Manual and Utility  

Installation) 

 
 

 
• 100–240VAC 50/60Hz 

Power Adapter 

        Using a power

         supply with a 

different voltage rating 

will damage and void 

the warranty for this 

product. 

DGS-1216T

D-Link 16-Port 

10/100/10 2 Combo 

Mini GBIC Gigabit 

Smart Switch

Summary of Contents for DGS-1216T - Switch











Reviews: