background image

1

5V DC Power Adapter

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and 

specifications subject to change without notice. DI-634M. 12302004

Before You Begin

1. 

If you purchased this router to share your high-speed Internet connection with other 

computers, you must have either an Ethernet-based Cable or DSL modem with an 

established Internet account from an Internet Service Provider (ISP).

2. 

It’s best to use the same computer that is connected to your modem for configuring 

the DI-634M 108G MIMO Wireless Router. The DI-634M acts as a DHCP server and 

will assign all the necessary IP address information on your network. 

See Appendix 

at the end of this Quick Installation Guide or the Manual on the CD-ROM for 

setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-634M 108G MIMO Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

     

Using a power supply with 

a different voltage rating will 

damage and void the warranty 

of this product.

If any of the above items are missing, please contact your reseller.

This product can be set up using 

any current web browser, i.e., 

Internet Explorer 6 or Netscape 

Navigator 7.

DI-634M

108G MIMO

Wireless Router 

Summary of Contents for DI-634M













Reviews: