background image

INSTALLATION

•  DIR-LX1870 || AX1800 Mesh Wi-Fi 6 Router
•  Power Adapter
•  Ethernet Cable
•  Quick Installation Guide
•  Quick Installation Card

You’re all good to go! Once the setup is complete, you can connect your devices using the Wi-Fi name (SSID) and password that you created during 
the setup.  Enjoy the Internet!

TECH TIP:

 Consider using the same Wi-Fi name and password as your old router. This will allow your existing Wi-Fi devices to automatically connect to your new router.

ENGLISH

PACKAGE CONTENTS

OPTION 1

D-LINK WI-FI APP SETUP

WEB BROWSER SETUP

OPTION 2

Quick Installation Guide

DIR-LX1870

AX1800 Mesh Wi-Fi 6 Router

Download the

 D-Link Wi-Fi

 app and launch it.

/

Tap 

Install New Device

. Scan the QR code on the Quick 

Installation Card. Follow the on-screen instructions to complete 
the setup.

/

Model Name: DEVICE
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
S/N: 123456789

SETUP  QR CODE

D-Link Wi-Fi

D-Link Wi-Fi

Connect your computer to the Wi-Fi details printed on the 
Quick Installation Card. Type 

http://dlinkrouter.local./ 

or 

http://192.168.0.1 

into a web browser. You will be asked 

for your Device/Admin Password. By default this  password is 

password

”. Type that in and follow the on-screen instructions 

to complete the setup.

/

Model Name: DEVICE
Wi-Fi Name: d-link-XXXX
Password: XXXXXXXX
S/N: 123456789

dlink-xxxx

Connect

xxxxxxxxx

xxxxxxxxx

Wi-Fi Name: dlink-XXXX

Wi-Fi Password: XXXXXXXX

http://dlinkrouter.local./ 

or

 

http://192.168.0.1

Admin Password = password

Admin Password:

Plug the router into a power source. Make sure that the power button 
is on.  Wait for the status LED to either flash orange or turn 
solid white.

/

VOICE ASSISTANTS

Why can’t I access the web-based configuration utility?

Verify that 

http://dlinkrouter.local./

 or 

http://192.168.0.1

 has been 

correctly entered into your Web browser. Make sure that you are connected 
to the correct Wi-Fi Name/SSID and password printed on the Quick 
Installation Card. Alternatively, you can use 

http://dlinkrouterXXXX.local./

 

where 

XXXX

 represents the last 4 characters of the MAC address. The device 

specific URL and MAC address are both located on the device label attached 
to the device.

Why can’t I access the Internet?

Ensure that your modem/gateway is powered on. Also ensure that the 
Ethernet cable is securely connected to both the router and modem. Verify 
that the Internet LED is illuminated on your router. If you still cannot access 
the Internet, power off your modem and router and power them back on, 
wait until all the LED’s are lit and try again.

What do I do if I forgot my Wi-Fi password?

If you forgot your password, you must reset your router. This process will 
revert all of your settings back to the factory defaults.

How do I restore the router to its factory default settings?

Locate the reset button on the bottom of the router. With the router 
powered on, use a paper clip to hold the button down for 10 seconds. 
Release the button and the router will go through the reset procedure. 

FREQUENTLY ASKED QUESTIONS

?

Having trouble installing your new product? D-Link’s website 
contains the latest user documentation and software updates for 
D-Link products. Customers can contact D-Link Technical Support 
through our website by choosing the relevant region.

TECHNICAL SUPPORT

This D-Link product includes software code de-
veloped by third parties, including software code 
subject to the GNU General Public License (“GPL”) 
or GNU Lesser General Public License (“LGPL”).  As 
applicable, the terms of the GPL and LGPL, and 
information on obtaining access to the GPL code 
and LGPL code used in this product, are available 
to view the full GPL Code Statement at:

https://tsd.dlink.com.tw/GPL

The GPL code and LGPL code used in this product 
is distributed WITHOUT ANY WARRANTY and is 
subject to the copyrights of one or more authors.  
For details, see the GPL code and the LGPL code 
for this product and the terms of the GPL and 
LGPL.

Written Offer for GPL and LGPL Source Code

Where such specific license terms entitle you 
to the source code of such software, D-Link will 
provide upon written request via email and/or 
traditional paper mail the applicable GPL and LG-
PLsource code files via CD-ROM for a nominal cost 
to cover shipping and media charges as allowed 
under the GPL and LGPL.  

Please direct all inquiries to:

Snail Mail:

Email:

Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708

GPLCODE@dlink.com

GPL CODE STATEMENT

i

Amazon Alexa Setup for D-Link Wi-Fi

https://www.dlink.com/en/alexa

The Google Assistant Setup for D-Link Wi-Fi

https://www.dlink.com/en/google-assistant

Model Name: DEVICE
Wi-Fi Name: d-link-XXXX
Password: XXXXXXXX
S/N: 123456789

Wi-Fi Name: dlink-XXXX

Wi-Fi Password: XXXXXXXX

United States

Website: http://support.dlink.com
Telephone: (877) 453-5465

Canada

Website: http://support.dlink.ca
Telephone: (800) 361-5265

This device is complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:

(1) The device may not cause harmful interference, and
(2) this device must accept any interference received, including 
interference that may cause undesired operation.

FCC WARNING

i

Reviews: