background image

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

Before You Begin

You will need the following:

Pentium III, 750MHz or above based computer with a CD-ROM Drive
and a minimum of 64MB RAM with Windows XP, 2000, Me, or 98SE.

IEEE 802.11g wireless adapter with an IP address.

Web browser with Javascript enabled. Internet Explorer 5.x or above,
Netscape 6.x or above, Mozilla 1.0 or above, or Opera 6.05 or above.

Projector or Monitor with VGA connector and VGA cable.

DPG-2000W

This product contains software
for use with Windows XP, 2000,
Me, and 98SE.

Wireless Presentation

Gateway

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of

their respective holders. Software and specifications subject to change without notice. DPG-2000W.03232004

DPG-2000W Wireless Presentation Gateway

Installation CD (Contains Software, Quick
Installation Guide, and Manual)

802.11g Antenna

AC Power Adapter

Using a power supply
with a different voltage

rating will damage this
product and void the warranty.

Summary of Contents for DPG-2000W - AirPlus G Wireless Presentation Gateway













Reviews: