D-Link DSL-2750E How To Set Up Download

Page: 1 / 4

Step 1

Connect device

1.1 Connect telephone line from wall outlet to DSL-2750E directly or

1.2 If you wish to use internet and your telephone at the same time, please use the splitter that

comes with the packaging box.

The splitter has three ports:

LINE

: Connect to a wall phone jack (RJ-11 jack)

Modem

: Connect to the Line interface of the router

PHONE

: Connect to a telephone set

1.3 Use LAN Cable (CAT5E: RJ45)

connect your computer to any LAN port of DSL-2750E.

Step 2

: Login to Router

2.1

Open

Web Browser (Internet Explorer, Firefox, Google Chrome) and enter

http://192.168.1.1 on the Address Bar

2.2 On the login page, please enter username and password and click ‘Login’.

Default Username and Password:

Username: admin

Password: admin

Summary of Contents for DSL-2750E

Page 1: ...o a wall phone jack RJ 11 jack Modem Connect to the Line interface of the router PHONE Connect to a telephone set 1 3 Use LAN Cable CAT5E RJ45 to connect your computer to any LAN port of DSL 2750E Ste...

Page 2: ...Saving and set the time zone that you are in and set the NTP Network Time Protocol Server Click Next to proceed to next step 3 3 PPPoE Configuration 3 3 1 Please select Country Malaysia 3 3 2 ISP Plea...

Page 3: ...Check the Enable Your Wireless Network box 3 4 2 Enter your preferred wireless network name SSID 3 4 3 Enter your wireless encryption key If you do not want to setup Wireless Security please Select N...

Page 4: ...ease follow steps below if you wish to change password Current Password Insert current Password Default Password is admin New Password Insert new Password Confirm Password Insert new Password again Cl...