ENGLISH
Quick Install Guide
2-Port USB 3.0 PCI Express Card
Thank you for purchasing the DUB-1310 2-Port USB 3.0 PCI Express Card. Follow
the easy steps in this guide to properly set up your adapter. Please verify that all the
package contents below are available.
DUB-1310
If any of the above items are missing, please contact your reseller.
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website or by phone.
United States
Telephone:
(877) 453-5465
Internet:
http://support.dlink.com
Canada
Telephone:
(800) 361-5265
Internet:
http://support.dlink.ca
Copyright ©2011 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other
trademarks are the property of their respective owners. Maximum transfer rate based on USB 3.0 specifications. Actual data throughput
will vary. To meet USB 3.0 transfer speeds, USB 3.0 hubs, cables and devices are required. Using a USB 1.1 or USB 2.0 port will affect
device performance. Product specifications, size and shape are subject to change without notice, and actual product appearance may
differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.0 (NA) | May 20, 2011
What This Product Does
The D-Link DUB-1310 is a 2-Port USB 3.0 PCI Express Card which delivers transfer
rates of up to 5Gbps - up to 10 times faster than USB 2.0. Once connected, you can
back up your photos, music, and HD movies to a USB 3.0 external storage device
faster than ever before.
Package Contents
DUB-1310 2-Port USB 3.0 PCI Express Card
Low Profile Bracket
CD-ROM with drivers and user manual
System Requirements
Step 1:
Before installing the DUB-1310, insert the CD-ROM into your CD drive. Click on
Install
from the autorun menu and follow the instructions to install the drivers.
Step 2:
Shut down your computer and unplug the power cable from your computer.
It is recommended to unplug all cables from your computer. Remove the case.
Please refer to your computer’s documentation for more information on how to
remove/open the case. Make sure you are properly grounded before installing
the PCIe card.
Step 3:
Install the DUB-1310 into an available PCIe slot. Connect a 4-pin 5V peripheral
power connector to the power connector on the DUB-1310.
Step 4:
Close the computer case, reconnect the power cable, and turn on your computer.
Your computer will automatically detect the DUB-1310 and install drivers for it.
Once installed you may plug in your USB devices.
Installation
• Windows® 7/Vista®/XP (SP3 or higher)
• Available PCI Express slot (x1, x4, x8, or x16)
• Available 4-pin 12V peripheral power connector
• CD-ROM drive
