background image

2

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.

DWL-

D-Link 

Air

Premier

TM

Wireless Access Point

5V 2.0A DC Power Adapter

©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-. 12062002

Before You Begin

Check Your Package Contents

DWL- Wireless Access Point

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

If any of the above items are missing, please contact your reseller.

It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-. The default IP address for the DWL- is

192.168.0.50

 with a Subnet Mask of 

255.255.255.0

. You will need to assign your

computer a Static IP address within the same range as the DWL-’s IP address
for the purpose of configuring the DWL-. 

See the Manual on the CD-ROM if

you need assistance in assigning a Static IP address for your network adapter.

        Using a power supply
        with a different voltage
rating will damage and void
the warranty of this product.

Summary of Contents for DWL-1000AP+









Reviews: