Configuration examples for the D-Link
NetDefend Firewall series
Scenario: How to configure IPSec VPN LAN-to-LAN Tunnel
Platform Compatibility: All NetDefend Firewall Series
Last update: 2008-03-07
Overview
In this document, the notation
Objects->Address book
means that in the tree on the left
side of the screen
Objects
first should be clicked (expanded) and then
Address Book
.
Most of the examples in this document are adapted for the DFL-800. The same settings can
easily be used for all other models in the series. The only difference is the names of the
interfaces. Since the DFL-1600 and DFL-2500 has more than one lan interface, the lan
interfaces are named lan1, lan2 and lan3 not just lan.
The screenshots in this document is from firmware version 2.12.00. If you are using an
earlier version of the firmware, the screenshots may not be identical to what you see on
your browser.
