PLANNING
GUIDE
All specifications subject to change without notice.
www.dacor.com
Ph. 800.793.0093
Heritage
®
24”, 27”, 30” Wide
Warming Drawer
Doc #: PGH-HWD.01 Revised 14 May 2018 Page 1 of 2
All tolerances: ±¹/₁₆” (±1.6 mm), unless otherwise stated.
HWDxxPS, HWDF30S
Electrical Circuit Required Total Connected Load
Min. Ambient
Operating Temp.
120Vac, 60 Hz, 15 Amp
grounded, dedicated circuit
4.0 Amp. @
120Vac, 60 Hz
32°F (0°C)
Handle Dimensions
Warming Drawer Overall Dimensions
Model
(A) Drawer Face
Width
(B) Chassis Face
Width
(C) Chassis Width
HWD24PS
24” (61.0 cm)
23 5/8” (60.0 cm)
22 1/4” (56.5 cm)
HWD27PS
27” (68.6 cm)
26 5/8” (67.6 cm)
25 1/4” (64.1 cm)
HWD30PS
HWDF30S
30” (76.2 cm)
29 5/8” (75.2 cm)
28 1/4” (71.8 cm)
WARNING
•
Observe all governing codes and ordinances during planning/
installation. Contact your local building department for details.
•
The drawer must be installed as directed in its installation
instructions.
HWDxxPS shown
(height/width typical)