background image

All specifications subject to change without notice.

Phone: (800) 793-0093

www.dacor.com

PLANNING

GUIDE

RR30NS, RR30NFS, RR30NIS, RR30NIFS

Renaissance

® 

30” Wide  

Electric Inductive Range

Document # PG05-009

Revised 03/21/13   Page 1/5

 warning

• 

Observe all governing codes and ordinances during planning 

and installation. Contact your local building department for 

further information. 

• 

This appliance must be installed in accordance with the 

accompanying installation instructions.

All tolerances ±1/16” (±1.6 mm) unless otherwise noted.

OvERALL DEPth DImENSIONS - SIDE vIEW

Product Dimensions

available Backguards

Part number Description

Compatibility

ADRB30E03

3 Inch

Optional on all models

ADRB30E06

6 Inch

Standard on models RR30NS, RR30NFS

Optional on models RR30NIS, RR30NIFS

ADRB30E09

9 Inch

Optional on all models

Models RR30NIS and RR30NIFS come equipped from the factory with 

flat stainless trim piece in place of a backguard. A backguard may be 

purchased as an optional accessory. Add an additional 1/16 inch to depth 

dimensions below when installing a backguard on models RR30NIS and 

RR30NIFS.

The trim on models RR30NS and RR30NFS are not compatible 

with a raised vent.
Models RR30NIS and RR30NIFS are compatible with Dacor 

raised vent models ERV30 and ERV3015. Use only these 

specified raised vent models.

Dimension rr30nS, rr30nFS

rr30niS, rr30niFS

A

46 1/4” (117.5 cm)

46 1/16” (117.0 cm)

C

25 1/2” (64.8 cm)

25 5/16” (64.3 cm)

D

23 3/8” (59.4 cm)

23 3/16” (58.9 cm)

Dimension

rr30nS

rr30niS

B

27 7/8” (70.8 cm)

27 11/16” (70.3 cm)

Model Versions

Model

Configuration

Handle Type

RR30NS

Freestanding,  

(full size side panels)

Mounted on

outside of door

RR30NS-C*

Freestanding,  

(full size side panels)

Mounted on

outside of door

RR30NFS

Freestanding,  

(full size side panels)

Flush handle,

integrated in door

RR30NFS-C*

Freestanding,  

(full size side panels)

Flush handle,

integrated in door

RR30NIS

Built-in/Slide-in 

(3 1/4” removable side panels)

Mounted on

outside of door

RR30NIFS

Built-in/Slide-in 

(3 1/4” removable side panels)

Mounted on

outside of door

* -C indicates corded wiring configuration, see page 2/5 for details.

1” (2.5 cm)

Front of open door
Front of handle

Front panel
Rear of front panel

Backguard thickness

3” (7.6 cm)

backguard*

External handle

shown, some models

have integral handle

(see inside cover)�

6” (15.2 cm)

backguard*

*�

See table for compatibility

Product width:

29 15/16” (76.0 cm)

35”

(88.9 cm)

to

37”

(94.0 cm)

9” (22.9 cm)

Backguard*

A

B

C

D

RR30NI[F]S:

3/8” (9.5 mm)

RR30N[F]S:

Full stainless

steel side panels

RR30NI[F]S:

3” (7.6 cm)

partial stainless

steel side panels

(removable)

Reviews: