background image

User Guide

1

SPECIFICATIONS

Use precautions to avoid damages to the product or injuries of users. Any actions against following contents will cause serious 
issues such as malfunction, electric shock, or burn.

USE DC12V ONLY

DC12V

DO NOT USE AC INPUT

AC INPUT

Do not cut or rejoion wires while product 
is connected wth live power source

Maximum driver quantity per serial 
connection is limited. Failure causes overload 
of current and damages to the product

Refer to ‘WIRE THICKNESS’ table to use proper 
wire thickness between SMPS and the first 
LED module
Failure will cause dimmed output

Cable length between SMPS and the first LED 
module is limited. Refer to ‘CONNECTION 
WITH POWER SUPPLY’ on page 2

Do not use the product under circumstances 
listed below

 - High temperature spots over 60˚C (140˚F)
 - Spots draw extreme moisture or dust
 - Spots have corrosive gas or highly effectied 
   by electromagnetic field

Avoid performing installation under rain or 
high humidity for outdoor use

Do not perform actions listed below

 - Alter or modify
 - Touch LED lamps with sharp objects
 - Put glue or silicon over the LED lamps

PRECAUTIONS

Model

FLEX RGB T20100

Power

Consumption

Min Bending

Radius

R20mm

Viewing

Angle

120

°

Weight

98g

Operating

Power

DC12V

Max Serial

Connection

3M (3 Units)

*Electronic dimming control is supported

FLEX RGB Series - T20100

PREPARATION

PREPARE CHANNELS

1. Clean moisture and dust inside

2. Make holes

3. Use bushing to protect wires

1. Wipe out dust, water, and oil inside. 3M tape will come off easily if product is mounted on uncleaned surfaces.
2. Make holes for wires from modules to SMPS.
3. Without bushins, wires will easily be cut and short-circuit will occur.
    *Use white paint inside the channels for better reflection

SUPPLIES REQUIRED

TOOLS REQUIRED

Wire Nuts, Cable Ties, IDC Connectors, VCTF(PLTC) Cable,
Super Glue, Silicon(optional)

Wire Stripper, Drill, Screw Driver, Wiper

SUPER GLUE

IP65

Color

Red

Green

Blue

White

5.0W

3.6W

3.9W

12W

Cut Mark

3cut

DAEHANTRANS CO.,LTD  

#7-11 Songdo-Dong, Yeonsu-Gu, Incheon, Korea

Tel.  +82 32 858 0491  Fax.  +82 32 832 8421 enquiry@daehantrans.com / www.daehantrans.com

Reviews: