Swing Aside Mount Assembly
DSAM4
Printed in Canada Manufactured by Daedalus Technologies in Canada
www.daessy.com
Page 1 of 6
Read all instructions carefully & check all components are present before
discarding packing materials.
Assembly Procedure
Assembly Procedure.....................................................................................................................................................................1
Identify the Parts.......................................................................................................................................................................2
The Frame Clamp Assembly....................................................................................................................................................2
Attach Frame Clamp Assembly to Wheelchair Frame .............................................................................................................3
Orient Frame Clamp Assembly ................................................................................................................................................3
Align the Frame Clamp Assembly ............................................................................................................................................4
Adjust the height and S-bend orientation .................................................................................................................................4
Setting the Swing Aside Direction ............................................................................................................................................5
Install Horizontal Tube Assembly .............................................................................................................................................5
Install the Total Quick Release Base – TUSB..........................................................................................................................6
Quick Release Orientation .......................................................................................................................................................6
Final Adjustments .........................................................................................................................................................................6
Caution
:
The Swing Aside Mount can support equipment that is heavy enough to unbalance an unoccupied or lightweight manual wheelchair when swung out to the side.
It is recommended to remove the device and/or mount before the wheelchair is vacated.
The horizontal tube assembly is pre-installed; tube length cannot be changed after ordering. Standard length 16”. Contact Daedalus Technologies for more
information.
