ASSEMBLY INSTRUCTIONS:
Item No: TT50218
1. Carefully unpack and layout the parts as shown in the illustration.
2. Place the base (A) on a smooth surface and attach the arms (B) to the base.
Adjust them to the correct position and tighten with the screws (C).
3. Screw the socket assembly (D) tightly into the base.
4. Screw the threaded rod (E) to the socket assembly (D).
5.
Screw knurl nut (F) on threaded rod (E).
This can be used to raise the shade a little if necessary.
6. Place the shade (G) over the end of the threaded rod (E) and
tighten the finial (H) securing the shade in place.
Note: Make sure the shade is touching each arm. If not
adjust it to make sure it is secure.
Recommended (2) maximum 60 WATT, Type “A” Bulbs
Or (2) maximum 13 WATT CFL Bulbs
(Bulbs not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 10/15/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
