background image

DK 145

.000 / R

ev

. 1.1.0 / 2010

-07-

18    Specifica

tions subjec

t t

o chang

e wi

thout

 notic

e. Err

ors and misprin

ts e

xc

epted.    © 2010 Dallmeier elec

tr

onic    w

w

w

.dallmeier

.c

om / inf

o@dallmeier

.c

om

Commissioning

VMC-1

Video  Management Center

Technical Data

Monitor

Size 

6" TFT

Resolution 

640 × 480 pixel

Complete System

Power supply 

12 V DC 

Power consumption 

Approx. 30 W

Operating temperature 

+5 °C to +35 °C 

Humidity 

10 – 70  % RH, non-condensing

Dimensions (W / H / D) 

Approx. 560  mm × 190  mm  ×  224  mm

Weight 

Approx. 3.8 k g

Approvals 

FCC, CE, RoHS

Certifications 

DIN EN 50130-4

Safety instructions

  Observe the ratings!

  Do not open the devices!

  Avoid the intrusion of dirt and liquids!

  Do not use any force!

Connection Assignment

Connection and Commissioning

Dimensions

Connection System

  Connect the modules with the main module.

  Connect the monitor with the main module.

  Connect the main module to the PC (hot plug).

  Connect the main module to the power supply.

The VMC-1 starts automatically and is ready for use after a few seconds.

Commissioning

The operating system detects the new device automatically.

  Note the appropriate messages of the operating system. 

  Follow the instructions given by the operating system.

  Finish the installation of the USB driver.

The VMC-1 is ready for operation with a CCTV system.

  Note the appropriate documentation of the CCTV system. 

The following technical data was valid at the time of the document compilation. 
Refer to www.dallmeier.com for possible updates.

Unit: mm

224

312

558

190

128

63

A

B

C

Jog-Shuttle

A

B

C

Joystick

Monitor

C

D

Main module /
Keyboard

J

E

F

G

H

I

A

  Cable interlock

B

  Cable conduit

C

  USB socket, type B

D

  Power IN 12 V DC (from main module)

E

  Microphone IN

F

  Power IN 12 V DC

G

  Power OUT 12 V DC (monitor)

H

  USB socket, type B (PC)

I

  4

×

 USB socket, type A (modules and monitor)

J

  8

×

 cable conduit

A

B

C C

C C

Connection Monitor

  Put the monitor hinges into the mounting plates (A, B).

  Fasten the monitor with the screws (C). 

  Connect the power cable with the monitor.

  Connect a USB cable with the monitor.

Reviews: