IQ16Q760
A B
Setting the watch to a different time zone:
By pressing button
“
A
” (<3 seconds) the current time zone is displayed. By pressing “
A
” again
for a shorter period, this time zone can be altered to the one you are currently in. The hands will
then automatically turn to this time zone.
Date and signal strength:
Normally the date can be read in the display. By pressing button
“
B
” ( <3 sec) a seconds
counter will appear, a symbol for an RC tower and a number. The number represents the
number of days since the last signal was received. If it reads
“
0
” , the signal has been received
in the last 24 hours.
Setting the hands:
Press button
“
B
” for more then 3 seconds. The hands should turn to the 12 O‟clock position.
When they
don‟t, the hands should be calibrated manually. To do this, press both buttons at the
same time for a few seconds. The letter
“
H
” will appear, indicating that the hour- and minute
hand can be altered. Continue pressing button
“
A
” untill the hour and minute hand have reached
the 12 O‟clock position.
If these hands have been set, press button
“
B
” once. An “
S
” should appear in the display., which
indicates the seconds hand can be altered. Keep pressing button
“
A
” untill the seconds hand
reaches the 12 O
„clock position. If all 3 hands have reached the 12 O‟clock position, press
button
“
B
” once ( > 3 seconds) to return to the normal time. The watch should automatically set
itself to the correct time within a few minutes.
General information
The range of the watch is a radius of approximately 1000 miles from Frankfurt.
