DataCard CD Series Repackaging For Shipment Download

Page: 1 / 5

CD Series Printer Repackaging for Shipment

527440-001 Rev. A

CD Series Printer Repackaging for Shipment

The following procedures are required for preparing the CD series printer unit for
shipment.

Press the power button to power off the printer.

The front panel on the printer powers off.

Disconnect the network or USB cable (the cable is not required for shipment).

Unplug the power cord from the printer.

Power Button

Summary of Contents for CD Series

Page 1: ...ollowing procedures are required for preparing the CD series printer unit for shipment 1 Press the power button to power off the printer The front panel on the printer powers off 2 Disconnect the network or USB cable the cable is not required for shipment 3 Unplug the power cord from the printer Power Button ...

Page 3: ...ckaging for Shipment 3 6 Pack and secure the printer CD Single hopper printer only a Place the foam caps on the front and back of the printer and set it in the shipping carton b Secure the shipping carton with shipping tape ...

Page 4: ...omponents i Unlock printer and place the original shipping restraint into the body of the printer ii Secure the shipping restraint behind the multi hopper iii Close and lock the printer b Pack the printer i Place the foam caps on the front and back of the printer and center it on the unfolded box ...

Page 5: ...serts iii Secure the folding of the box using the four T tabs iv Place the cover on top of the box c Secure the box for shipping i Insert and close the two plastic handles to secure the cover to the box ii Wrap shipping tape around the box and cover to secure the container for shipping ...