background image

Datalogic S.r.l.

Via San Vitalino 13
40012 Calderara di Reno (BO) 
Italy
Tel. +39 051 3147011
Fax +39 051 3147205

©2017-2018 Datalogic S.p.A. and/or its affiliates 

 

All rights reserved.

 

 

Without limiting the rights under copyright, no part of this documentation may be reproduced,

stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without
the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted
a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in
this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future
revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative.
Electronic versions may either be downloadable from the Datalogic website (

www.datalogic.com

) or provided on

appropriate media. If you visit our website and would like  to  make  comments  or  suggestions about this or other
Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo
are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. 
Falcon and the Falcon logo are trademarks of Datalogic S.p.A. and/or its affiliates, registered in many countries including
the U.S.A. and the E.U. All other brand and product names may be trademarks of their respective owners.

Patents

See

 www.patents.datalogic.com

 

for patent list.

Falcon X4  - 2D Imager

This product is covered by one or more of the following patents:
Design patents: AU329643, EP001180673, EP002421560, USD622726, USD737822, USD779491, ZL200930383849.1,
ZL201430286638.7
Utility patents: EP0999514B1, EP0996284B1, EP1128315B1, EP1172756B1, EP1396811B1, EP1413971B1, EP1804089B1,
EP2315156B1, EP2517148B1, EP2649555B1, IT1396943, JP4435343B2, JP5192390B2, US6412698, US6415978,
US6512218, US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US8113430, US8888003,
US8915443, ZL200680050007.8, ZL200980163411.X.

Falcon X4  - 1D Imager

This product is covered by one or more of the following patents:
Design patents: AU329643, EP001180673, EP002696088, USD622726, ZL200930383849.1, ZL201530439997.6
Utility patents: EP1128315B1, EP1396811B1, EP1413971B1, EP1797521B1, EP2517148B1, EP2649555B1, IT1396943,
US6098883, US6412698, US6415978, US6808114, US6997385, US7387246, US7506816, US8888003, US8915443,
ZL200980163411.X.

Cleaning The Device

Periodically clean the Falcon X4 device using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%).
Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, solvents) or abrasive pads to
clean the device. 

Waste Electrical and Electronic Equipment (WEEE)

 

Information for the User

At the end of its useful life, the product marked with the crossed out wheeled wastebin must be disposed of separately
from urban waste.
For more detailed information about disposal, contact the supplier that provided you with the product in question or
consult the dedicated section at the website 

http://www.datalogic.com

.

Informazione per gli utenti

L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile,
separatamente dai rifiuti urbani.
Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal quale è stata acquistata l’apparecchiatura
o consultare la sezione dedicata sul sito 

http://www.datalogic.com

.

Information aux utilisateurs

Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures barré ne doit pas être éliminé avec les
déchets urbains.
Pour obtenir des informations complémentaires concernant l'élimination, veuillez contacter le fournisseur auprès duquel
vous avez acheté le produit ou consulter la section consacrée au site web 

http://www.datalogic.com

.

Benutzerinformation bezüglich 

Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen Hausmüll entsorgt werden. Eine
entsprechende Mülltrennung ist erforderlich. 
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten über den sie das Produkt erworben haben,
oder besuchen sie unsere Hompage unter 

http://www.datalogic.com

.

Información para el usuario

Al final de su vida útil, el producto marcado con un simbolo de contenedor de bassura móvil tachado no debe eliminarse
junto a los desechos urbanos.
Para obtener una información más detallada sobre la eliminación, por favor, póngase en contacto con el proveedor donde
lo compró o consultar la sección dedicada en el Web site 

http://www.datalogic.com

.

 

Rugged Mobile Computer with 1D/2D Imager

Safety & Regulatory Addendum

                     852001200                (Rev. A)              January 2018

General Safety Rules

Power Supply

The device is intended to be supplied by a self-contained rechargeable Lithium Ion battery pack
(UL listed LPS/SELV power source) and/or by UL Listed/CSA Certified Power Unit LPS/SELV
power source which supplies power directly to the unit via the micro USB connector of the cable.
The device could be also used with Certified Accessories (Dock/Cradle). The Dock/Cradle
accessories are intended to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV which
supplies power via the power connector of the cable. 
Any changes or modifications to equipment, not expressly approved by Datalogic could void the
user's authority to operate the equipment.

Battery Information

By default, the main battery pack is disconnected at the factory to avoid damage due to
excessive draining.
The rechargeable battery pack is less than half of full charge when delivered. Charge the battery
pack as indicated in the Quick Start Guide or in the User Manual, before using the Falcon X4
terminal.
The battery pack autonomy varies according to many factors, such as the frequency of barcode
scanning, RF usage, battery life, storage, environmental conditions, etc.
Close to the limits of the working temperature, some battery performance degradation may
occur.
The Falcon X4 should be charged at an ambient temperature between 0 - 35º C (32 to 95 ºF) to
achieve the maximum charging rate. 
Never charge the device battery in a closed space where excessive heat can build up. 
As a safety precaution, the battery may stop charging to avoid overheating.
The Falcon X4 may get warm during charging; this is normal and does not mean a malfunction. 
Even if the storage temperature range is wider, it is recommended to store the terminal and the
batteries at environmental temperature, in order to achieve the longest battery life.

Battery Safety Guidelines

NOTE

Read carefully the Falcon X4 user manual (available at 

www.datalogic.com

) before performing

any type of connection to the Falcon X4.
The user is responsible for any damage caused by incorrect use of the equipment or by
inobservance of the indication supplied in the user manual.

CAUTION

Before using the devices and the battery packs, read this Addendum carefully.

Use only the components and accessories supplied by the manufacturer for
the specific Falcon X4 being used.

Do not attempt to disassemble the Falcon X4 device, as it does not contain
parts that can be repaired by the user. Any tampering will invalidate the
warranty.

When replacing the battery pack or at the end of the operative life of the

Falcon X4 device, disposal must be performed in compliance with the laws in
force in your jurisdiction. 

Do not submerge the Falcon X4 in liquid products.

For further information or support, refer to the Datalogic web site:

www.datalogic.com

CAUTION

Do not incinerate, disassemble, short terminals, or expose to high temperature. Risk of fire and
explosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrect
type. Dispose of batteries as required by local authorities.

CAUTION

Avoid storing batteries for long periods in a state of full charge or very low charge.
We recommend charging the battery pack every two to three months to keep its charge at a
moderate level to maximize battery life.
Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and
ensures maximum performance.

WARNING

Use only Datalogic approved batteries and accessories for battery charging.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.
Mettre au rebut les batteris usagées confor mément aux instructions.

WARNING

Installing, charging and/or any other action should be done by authorized personnel and
following this manual.
The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to
abusive conditions.
If the battery pack is replaced with an improper type, there is risk of explosion.
Do not place the battery pack in or near a fire or other heat source; do not place the battery
pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot
weather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressure
containers, on induction cook surfaces or similar devices. Doing so may cause the battery pack
to generate heat, explode or ignite. Using the battery pack in this manner may also result in a
loss of performance and a shortened life expectancy.
To power the cradle, use only a Datalogic approved power supply. The use of an alternative
power supply will void the product warranty, may cause product damage and may cause heat,
an explosion, or fire.
The area in which the units are charged should be clear of debris and combustible materials or
chemicals.
Do not use the battery pack of this terminal to power devices other than this device.
Immediately discontinue use of the battery pack if, while using, charging or storing the battery
pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears
abnormal in any other way.
Do not short-circuit the battery pack contacts connecting the positive terminal and negative
terminal. This might happen, for example, when you carry a spare battery pack in your pocket
or purse; accidental short–circuiting can occur when a metallic object such as a coin, clip, or
pen causes direct connection of the contacts of the battery pack (these look like metal strips
on the battery pack). Short–circuiting the terminals may damage the battery pack or the
connecting object.
Do not apply voltages to the battery pack contacts.
Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise
subject it to strong impacts, pressures, or shocks.
Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack
contains safety and protection devices, which, if damaged, may cause the battery pack to
generate heat, explode or ignite.

Wireless and Radio Frequencies Warnings

Laser Safety

The following information applies to Laser Aiming System, used on Falcon X4 variants with 2D
imager.
The laser light is visible to the human eye and is emitted from the window indicated in the figure
below.
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX OUTPUT RADIATION 1 mW
COMPLIANT WITH EN 60825-1 (2007) and EN 60825-1 (2014)

WARNING

In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the
contact occurs, immediately wash the affected area with water and consult a doctor.
Do not solder directly onto the battery pack.
Do not expose the battery pack to liquids.
Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on
a hard surface, you should take it to the nearest Authorised Repair Centre for inspection
before continuing to use it.
If your device stops working for any reason, do not use its battery on other electronic devices
without a prior check and approval by an Authorised Repair Centre.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Collect and recycle waste batteries separately from the device in compliance with European
Directive 2006/66/EC, 2011/65, 2002/96/EC and subsequent modifications, with US and
China regulatory laws and regulations about the environment.

WARNING

Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications or attachments could damage the product and may violate laws and
regulations.
Most modern electronic equipment is shielded from RF signals. However, certain electronic
equipment may not be shielded against the RF signals generated by Falcon X4.
Datalogic recommends persons with pacemakers or other medical devices to follow the same
recommendations provided by Health Industry Manufacturers Associations for mobile
phones.
Persons with pacemakers:

Should ALWAYS keep this device more than twenty five (25) cm from their
pacemaker and/or any other medical device;

Should not carry this device in a breast pocket;

Should keep the device at the opposite side of the pacemaker and/or any other
medical device;

Should turn this device OFF or move it immediately AWAY if there is any
reason to suspect that interference is taking place.

Should ALWAYS read pacemaker or any other medical device guides or should
consult the manufacturer of the medical device to determine if it is adequately
shielded from external RF energy.

In case of doubt concerning the use of wireless devices with an implanted medical device,
contact your doctor.
Turn this device OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may use equipment that could be
sensitive to external RF energy.
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If a
vehicle’s wireless equipment is improperly installed and the air bag inflates, serious injury
could result.
Turn off the device when in any area with a potentially explosive atmosphere. Observe
restrictions and follow closely any laws, regulations, warnings and best practices on the use
of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where
any operation involves use of explosive materials.
Do not store or carry flammable liquids, explosive gases or materials with the device or its
parts or accessories.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked or
shown.
Sparks in such areas could cause an explosion or fire, resulting in injury or even death.

NOTE

The artwork below may be only a draft. Please refer to the label attached to the product for
information about certification marks.

Laser Warning Label

Printed Data Label

Marks Label

Scan Window

Printed Data Label

This document is an addendum to the Quick
Start Guide (QSG) for this product. See the QSG
for additional product information.

©2017-2018 Datalogic S.p.A. and/or its affiliates. All
rights reserved. Datalogic and the Datalogic logo are
registered trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.

www.datalogic.com

Reviews: