background image

 

Model 

                                                                                                                                         

 

PMSW50U SIDE WINDER®  PROJECTOR MOUNT  

  

To ensure the correct usage, please read and follow the instructions  manual thoroughly. Please store the instructions in a safe place for future reference.  

 

 
 
 
 
 
 
 
 

 

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight   of both the projector

 and the mount. 

Fully tighten all of the mounting screws as specified in the instructions.

Special techniques are necessary for installation of the mount.

 

Do not attempt to perform this work by yourself. 
Request an installation specialist to install this unit. 
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

  

Please remember that if you remove the mount from  the wall/ceiling  later, you will find the screw holes and anchor bolts for the

mounting unit left on the ceiling. 

All  PDR mounts and adapters carry a lifetime warranty against defects in material and workmanship. We are not liable for 
improper installation that results in damage to mounts, adapters or presentation equipment.

Mounts by

 

 

 A division of David Engineering & Mfg. Inc.

  

                                               

!

Simple precision adjustments 

!

Low profile 

!

1 ½”NPT-ready or flush mount

!

Micro adju30° -5° Pitch *

!

Micro adju -5° yaw *

!

360 ° rotation

!

55 lb load rating

!

Lateral shift capable

!

Quick projector removal with exclusive

 “ Bayonet lock “

  * “Patent Pending Micro Adjustment

2 3/8 ” 

 

 

           Features 

Thank you for purchasing the

 PDR 

Projector mount with the exclusive

 “Bayonet locking system”. 

Rotate 360 deg

1

Micro pitch adjustment

Micro yaw adjustment

Summary of Contents for PDR SIDE WINDER PMSW50U







Reviews: