a.Install 4 AA batteries on the inside of the door
b.Enter 1
-
5
-
9
-
# or 1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
# (depending on model)
c.Turn handle before the green light turns off
d.To lock your safe, close door & turn handle back to the locked
position
**If your code is correct a green light will turn on for
approximately 5 seconds & you will also hear a
‘
Click
’
**If the code is incorrect, a red
light will turn on, followed by 5
‘
Beeps
’
NOTE : Be sure to press firmly &
ONLY use your finger tips to
press the keys on the keypad.
DO NOT USE your finger nail, a
pen, etc. This will damage the
keys.
Protector depo
cash plus 1 E
Quick start
Safe operation & programming
Basic features & functions
a. 6 User Codes available : Master, User 1, User 2, User 3, User 4,
& User 5
NOTE : Avoid confusion
-
keep notes on which code belongs to
which user.
b. If 4 incorrect codes are entered consecutively, the keypad will
shut down for a period of 5 minutes. During this shut down
period the keypad will not accept any codes
c. Programmable time delay function can be set from 01 minutes
to 59 minutes
d. Optional dual user mode, in this mode two separate codes will
need to be entered to unlock the safe
Your Master Code is factory set to : 1
-
5
-
9
-
# or 1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
#
(depending on model)
NOTE : The Master Code should always be held by the owner of the
safe. You will not be able to activate/delete users, set up single/
dual entry and set up time delay without the Master Code.
TO OPEN YOUR SAFE
Single User Mode
[Default Setting]
a. Input : Code
-
# [light stays green for 5 seconds]
b. Turn the handle clockwise before the green light disappears
Example : 1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
#
Invalid Code: Red light along with 5
‘
Beeps
’
Dual User Mode
[Please refer to Setting Single User & Dual User Mode; ]
a. Input : 1 st Code
-
# [lock will
‘
Beep
’ 2
times]
b. Input : 2 nd Code
-
# [light stays green for 5 seconds]
c. Turn the handle clockwise before the green light disappears
Example : 1 st Code
-
#
-
2 nd Code
-
# Invalid Code: Red light along
with 5
‘
Beeps
’
Wrong Try Penalty If 4 wrong codes are entered, the
keypad will not accept any codes for 5 minutes. If you press any key
during this penalty, the orange light will turn on for approximately
2 seconds and you will hear a
‘
Beep
’.
CHANGING THE MASTER CODE
[Code length : 3
-
8 digit code]
NOTE : Always per form this operation with the door opened! Test
the new code several times before closing the door.
a. Input : *
-
* [lock will
‘
Beep
’ 2
times]
b. Input : 8
-
8
-
8
-
# [lock will
‘
Beep
’ 2
times]
c. Input : Current Master Code
-
# [lock will
‘
Beep
’ 2
times]
d. Input : New Master Code
-
# [lock will
‘
Beep
’ 2
times]
e. Re
-
Input : New Master Code
-
# [light stays green for 3 seconds]
Example: *
-
*
-
8
-
8
-
8
-
#
-
Master Code
-
#
-
New Master Code
-
#
-
New Master Code
-
#
**Unsuccessful Code Change: 5
‘
Beeps
’
[the old code is still valid];
repeat steps 1
-
5
