background image

F15 MIRRORED SELF-CONT

AINED REFRIGERA

TED DISPLA

Y CASES

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

F15 Serview

Mirrored Self-Contained Refrigerated Display Cases

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date____________________

F15MC48N

SPECIFICATIONS

Top is constructed of 16-gauge stainless steel, with integral front 
nosing and  90º turn down at rear.  Interior sub-top is made of 
ABS plastic and 2.00” die foam is laminated between the interior 
and exterior top.

Refrigerated base interior back and bottom is constructed of a 
22-gauge 2BF stainless steel.  Exterior sides, bottom and back are 
made of 22 gauge galvanized steel.  Both left and right interior 
sides are formed of ABS plastic.  The base is injected with 2.00” 
of high density polyurethane foam between the exterior and 
interior.  Refrigerated base fronts are made of .095” thick ABS 
thermoformed plastic and backed up by ridged polyurethane 
water blown injection molded frames.  The frames are an excel-
lent thermo-break and superior structural material for fastening 
doors and drawers.  Unit is furnished with one epoxy coated shelf 
for each door.  Exterior machine compartment side is constructed 
with18-gauge galvanized steel.  

Exterior door fronts are made of 22- gauge stainless steel; and 
has an interior made of ABS plastic with formed in channels to 
house the snap-in dart style vinyl magnetic gasket.  Each door 
front is injected with 1.87” of high density polyurethane foam 
between the exterior and interior.  Handles are recessed black 
plastic and held in with a positive lock system.

Display section exterior sides are made of 18-gauge stainless steel.  
Exterior display section top to be 22-gauge galvanized metal.  Interior 
sides are made of .095” thick ABS plastic with molded shelf supports.  
The interior bottom is constructed with stainless steel for long lasting 
durability.  Display section is fully insulated with high density polyure-
thane foam between the interior and exterior.  Four adjustable epoxy 
coated wire shelves are provided for the display section.  An on/off 
switch for the display section light(s) is located at the right end of the 
front facing, above the display section doors.

Display case refrigeration system consists of a full-length top mounted 
coil with multiple fans circulating the air throughout the cabinet utilizing 
a thermostatic control.  An ABS plastic drip pan is placed below the coil 
with a clear drain hose for running the condensation to the lower base 
mechanical section.

Front of the display section is equipped with two sliding and removable 
self-closing .50” thick argon filled, low-e glass doors with a warm edge 
spacer.  The vertical outsides of each door tuck into an extruded channel 
running vertically up each side.  Front nosing to be 20-gauge stainless 
steel.

Unit is supported with two 14-gauge leg rails that run the entire 
length of the unit.  Leg rails are welded to the bottom side of the 
unit and are tied together with two 12-gauge braces running front 
to back.  Caster/leg boxes are welded inside the leg rail and 6.12” 
adjustable tapered legs are mounted as standard with (4) 5/16” 
bolts.

Self-contained models have a pre-wired condensing unit housed in 
a machine compartment, standard on right, with an easy removable 
louver panel for quick access.  Machine compartment also is supplied 
with an 8’ cord and plug and electrical junction box. 

Base interior cabinet is cooled with mullion style coated blower 
coil(s) mounted between each door/drawer section for very even air 
and temperature control.  Blower coils encloses refrigeration lines, 
evaporator coil, expansion valve, thermostat and fans.  Interior 
refrigerated base cabinet and display section to maintain 36º  to 40º  
temperatures at 100º  ambient room temperature.

Back has 2” thick panel, constructed on 22-gauge stainless steel 
interior, 2” of high-density polyurethane foam and 22-gauge 
galvanized steel exterior.  Interior of back panel has (2) angled 
glass mirrors.

MODELS:

 

F15MC48N

 

24” Deep Upper 

 

Display Section

 

F15MC72N

 

24” Deep Upper

 

Display Section

STANDARD FEATURES

•  Display exterior sides are made of 18-gauge stainless 

steel

•  ABS plastic interior sides with molded shelf supports
•  (4) adjustable epoxy coated wire shelves
•  On/off switch for the display section light(s)
•  Top mount coil with multiple fans circulating the air 

throughout the cabinet

•  Display section runs off a thermostatic control
•  Sliding and removable self-closing .50” thick argon 

filled, low-E, warm edge insert, thermopane glass doors 
with left and right vertical gasket

BASE

•  Standard heavy duty units have unfinished base ends
•  Base top is constructed of 16-gauge stainless steel
•  High density polyurethane foam throughout unit
•  Refrigerated base fronts are made of .095” thick 

ABS plastic backed by rigid polyurethane water blown 
injection molded frames (NO WOOD)

•  Epoxy coated shelf for each door
•  Exterior door fronts are stainless steel with ABS plastic 

liner

•  Snap-in dart style vinyl magnetic gasket
•  Door handles are recessed black plastic and held in 

with a positive lock system

•  14-gauge leg rails that run the entire length of the 

unit

•  6.12” adjustable full stainless steel legs and bullet 

feet

•  Base interior cabinet is cooled with mullion style 

coated blower coil(s)

•  Environmentally friendly HFC-404A refrigerant

OPTIONS AND ACCESSORIES

 

Stainless steel back

 

Stainless steel end

 

Laminate facing

 

Laminate back

 

Laminate end

 

220 volt/50 cycle - inclusion of this option will 
alter specifications

Reviews: