background image

F15 P

ASS-THROUGH REMOTE REFRIGERA

TED DISPLA

Y CASES

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

F15 Serview

Pass-Through Remote Refrigerated Display Cases

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date____________________

F15PR48N

SPECIFICATIONS

Top is constructed of 16-gauge stainless steel, with integral front and 
rear nosing.  Interior sub-top is made of ABS plastic and 2.00” die 
foam is laminated between the interior and exterior top.

Refrigerated base interior back and bottom is constructed of a 
22-gauge 2BF stainless steel.  Exterior sides, bottom and back are 
made of 22 gauge galvanized steel.  Both left and right interior 
sides are formed of ABS plastic.  The base is injected with 2.00” of 
high density polyurethane foam between the exterior and interior.  
Refrigerated base fronts are made of .095” thick ABS thermoformed 
plastic and backed up by ridged polyurethane water blown injection 
molded frames.  The frames are an excellent thermo-break and 
superior structural material for fastening doors and drawers.  Unit 
is furnished with one epoxy coated shelf for each door.  Exterior 
machine compartment side is constructed with18-gauge galvanized 
steel.  

Exterior door fronts are made of 22- gauge stainless steel; and has 
an interior made of ABS plastic with formed in channels to house the 
snap-in dart style vinyl magnetic gasket.  Each door front is injected 
with 1.87” of high density polyurethane foam between the exterior 
and interior.  Handles are recessed black plastic and held in with a 
positive lock system.

Display section exterior sides are made of 18-gauge stainless steel.  Exte-
rior display section top to be 22-gauge galvanized metal.  Interior sides are 
made of .095” thick ABS plastic with molded shelf supports.  The interior 
bottom is constructed with stainless steel for long lasting durability.  Display 
section is fully insulated with high density polyurethane foam between 
the interior and exterior.  Four adjustable epoxy coated wire shelves are 
provided for the display section.  An on/off switch for the display section 
light(s) is located at the right end of the front facing, above the display 
section doors.

Display case refrigeration system consists of a full-length top mounted 
coil with multiple fans circulating the air throughout the cabinet utilizing 
a thermostatic control.  An ABS plastic drip pan is placed below the coil 
with a clear drain hose for running the condensation to the lower base 
mechanical section.

Front of the display section is equipped with two sliding and removable 
self-closing .50” thick argon filled, low-e glass doors with a warm edge 
spacer.  The vertical outsides of each door tuck into an extruded channel 
running vertically up each side.  Front and rear nosing to be 20-gauge 
stainless steel.

Unit is supported with two 14-gauge leg rails that run the entire length of 
the unit.  Leg rails are welded to the bottom side of the unit and are tied 

together with two 12-gauge braces running front to back.  Caster/leg 
boxes are welded inside the leg rail and 6.12” adjustable tapered legs 
are mounted as standard with (4) 5/16” bolts.

Remote models must be hard wired to the J-box in the field.  J-box is 
located on the exterior bottom. 

Base interior cabinet is cooled with mullion style coated blower coil(s) 
mounted between each door/drawer section for very even air and tem-
perature control.  Blower coils encloses refrigeration lines, evaporator 
coil, expansion valve, thermostat and fans.  Interior refrigerated base 
cabinet and display section to maintain 36º to 40º temperatures at 100º 
ambient room temperature.

Back has (2) sliding and removable self-closing .50” thick argon filled, 
low-e glass doors with a warm edge spacer.

MODELS:

 

F15PR48N

 

24” Deep Upper 

 

Display Section Remote

 

F15PR72N

 

24” Deep Upper

 

Display Section Remote

STANDARD FEATURES

•  Display exterior sides are made of 18-gauge stainless 

steel

•  ABS plastic interior sides with molded shelf supports
•  (4) adjustable epoxy coated wire shelves
•  On/off switch for the display section light(s)
•  Top mount coil with multiple fans circulating the air 

throughout the cabinet

•  Display section runs off a thermostatic control
•  Sliding and removable self-closing .50” thick argon 

filled, low-E, warm edge insert, thermopane glass doors 
with left and right vertical gasket

BASE

•  Standard heavy duty units have unfinished base ends
•  Base top is constructed of 16-gauge stainless steel
•  High density polyurethane foam throughout unit
•  Refrigerated base fronts are made of .095” thick 

ABS plastic backed by rigid polyurethane water blown 
injection molded frames (NO WOOD)

•  Epoxy coated shelf for each door
•  Exterior door fronts are stainless steel with ABS plastic 

liner

•  Snap-in dart style vinyl magnetic gasket
•  Door handles are recessed black plastic and held in 

with a positive lock system

•  14-gauge leg rails that run the entire length of the 

unit

•  6.12” adjustable full stainless steel legs and bullet 

feet

•  Base interior cabinet is cooled with mullion style 

coated blower coil(s)

•  Environmentally friendly HFC-404A refrigerant

OPTIONS AND ACCESSORIES

 

Stainless steel back

 

Stainless steel end

 

Laminate facing

 

Laminate back

 

Laminate end

 

220 volt/50 cycle - inclusion of this option will 
alter specifications

Reviews: