Short Form Specifications
Exterior top
is one-piece, 16-gauge stainless steel, with integral 2.12”
(5.4cm) high square nosing on front. Top has a mechanically cooled refrigerat-
ed raised rail at rear with openings to accommodate 1/6 size pans. Pans and
adapter bars are provided by others. Pans are recessed 3” (7.6cm) or 2”
(5.1cm) and set on adjustable stainless steel pan supports. Rail interior is 22-
gauge stainless steel. Raised rail openings have 20-gauge stainless steel remov-
able lids. Unit is equipped with separate expansion valve and on/off switch for
refrigerated rail. Temperature in top opening to maintain 33°F (1°C) to 41°F
(5°C), with pans recessed 3” (7.6cm), at 86°F ambient room temperature,
meeting NSF7 requirements.
Exterior Back and Bottom
are 24-gauge galvanized steel. Exterior ends are
finished with 18-gauge galvanized steel.
Base Interior
is 22-gauge stainless steel back and bottom. Base interior ends
and door frames are thermoformed ABS plastic. Base is insulated with 1.5”
(3.8cm) high density foamed in place polyurethane.
Door(s)
have a 22-gauge stainless steel exterior front, with thermoformed
ABS plastic interior liner, black recessed handle and snap in magnetic gasket
which is easily replaceable. Each interior door section has (1) removable
epoxy coated wire shelf.
Base
has a blower coil assembly with expansion valve located behind door
mullion. Base is equipped with independently controlled thermostat and sole-
noid valve. On/off switch for unit is located behind the hinged panel.
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Electrical connections
are 115 volt, 60 Hertz, single phase. Unit must be
hard wired.
Refrigeration System Components
— HFC-404A
Optional Accessories & Modifications
906A
Stainless steel end
505H
Stainless steel back
505F
Laminate facing (full front)
906E
Laminate end
905A
Laminate back
1030A
Cutting board (Sanalite or composite)
109
Condensate evaporator (1 per coil) for base
107F
Tray rack
102
Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
108
Locks
120F
Cold pan drain
213
*220V/50 cycle
*Inclusion of this option will alter the
electrical specifications of the unit
Model F18RR79
31.5” (80cm) Deep Remote Reduced Height Rail
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
F18RR
®
