background image

Dell™ Inspiron™ 560s Service Manual 

 

 

Notes, Cautions, and Warnings 

Information in this document is subject to change without notice. 

© 2009 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, and 

Inspiron

 are trademarks of Dell Inc.; 

Intel SpeedStep

 is a registered trademark of Intel Corporation in the U.S. and other 

countries; 

Microsoft

 and 

Windows 

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Regulatory Model: DCSLE 

November 2009     Rev. A00

 

Before You Begin

 

Technical Overview

 

Computer Cover

 

Support Bracket

 

Front Bezel

 

Memory Module(s)

 

PCI and PCI Express Cards

 

Drives

 

Fans

 

Front I/O Panel

 

Processor

 

System Board

 

Power Supply

 

Battery

 

System Setup

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Inspiron 560s











































Reviews: