I‐1083
Page 1 of 4
Rev. A‐40009
8/6/14
DEMA
One
Open Container Portable Dispensing Unit
Overview
The DEMA One (DM1) open container dispensing system is built to make cleaning easier and more
effective. The versatility and functionality of the DM1 makes this the next generation in portable
dispensing systems.
Warnings
All installations must conform to local plumbing codes and use approved backflow
prevention devices. A pressure indicating tee is to be installed with existing faucets
according to local plumbing codes in the state of Wisconsin and any other state that
requires the use of a pressure indicting tee.
ALWAYS WEAR PROTECTIVE CLOTHING AND EYEWEAR WHEN
WORKING WITH CHEMICAL PRODUCTS.
Package
Contents
1 – DEMA One unit
3 – Sections of draw tube
1 – Instruction sheet
Set
‐
Up
and
Installation
Draw Tube Installation:
The DM1 unit comes with three draw tube lengths to fit the most common bottle sizes available.
Please choose the correct draw tube based on your requirements. Push the tube onto the barb at
the base of the DM1 unit, until it is at the top of the barb.
Bottle
Size
Draw
Tube
Length
2L & ½ Gallon F‐Style
23.16cm 9.12in
1 Gallon F‐Style
30.18cm 11.88in
5L & 1 Gallon Round Style
31.75cm 12.5in
