ELC.00.30000
1
2
3
4
5
6
POWER
HUB
2
Kit Contents
Power Distribution Module
WARNING!
–
When mounting electronics to the
front fender, forks, fairing, or handlebars, you must
turn the handlebars fully left and right and fully
compress & uncompress the suspension to ensure
the wires will not bind and have enough slack for
your motorcycle to operate properly.
PLEASE READ BEFORE INSTALLING
TWISTED THROTTLE products should be installed by a
qualified, experienced motorcycle technician. If you are
unsure of your ability to properly install a product, please
have the product installed by your local motorcycle
dealer. TWISTED THROTTLE takes no responsibility for
damages caused by improper installation.
Medium strength liquid thread-locker (i.e., "Locktite")
should be used to secure all screws, bolts, and nuts.
All screws, bolts, and nuts should be checked after
driving the first 30 miles (50 km) to ensure that all are
tightened to the proper torque.
All screws, bolts, and nuts, including all replacement
hardware provided by TWISTED THROTTLE should be
tightened to the torque specified in the OEM mainte-
nance manual for your motorcycle. If no torque
specifications are provided in the OEM maintenance
manual, the following torques may be used:
M5.........................................................3.5 ft-lbs (5 Nm)
M6.........................................................6.5 ft-lbs (9 Nm)
M8........................................................16 ft-lbs (22 Nm)
M10......................................................32 ft-lbs (43 Nm)
M12..................................................... 55 ft-lbs (75 Nm)
- 6 Mini ATC Fused circuits for a total of 30 amps
- Each circuit can be switched or unswitched
- Wiring harness included
- Adhesive Velcro included
.............................................................
Features:
Twisted Throttle LLC
570 Nooseneck Hill Rd
Exeter, RI 02822
Phone: 401.284.4200
Fax: 401.223.6954
www.twistedthrottle.com
Instruction Rev: 01
Power Hub
Qty.........................1
2
Ring Terminal
Qty.........................1
3
Posi-Tap
Qty........................2
1
4
Velcro
Qty..................1 Set
Kit Contents
DENALI
