ENG-1
DENVER WCM-3004
Wild Camera
Quick Start Guide
Overview
1) Bottom Cover 2) microSD Slot
3) USB Connector 4) TV Out connector
5) PIR 6) Infrared Flash
7) Lens 8) GSM Antenna
9) 2 inch color LCD Display 10) Sound recorder
11) SIM card slot 12) Lock
13) Power switch 14) Battery Depot
15) Portable remote controller
The camera has 3 basic operation modes:
1. OFF mode: Power switch is at OFF position.
2. ON mode: Power switch is at ON position.
3. TEST mode: Power switch is at TEST position.
In the above three modes, the OFF mode is the specified safe mode when replacing the microSD or batteries and transporting the camera.
A. There are 3 modes under system setting for your selection.
a. Camera
It only takes photos at a time.
b. it only takes videos at a time.
c. Camera &Video.
It takes photo firstly, then takes videos.
B. There are also 2 ways to take photos or videos.
a. Manually by using the remote control
After sliding power switch to ‘TEST’, without any menu on the screen, press (OK) on the remote control to take
photos or videos.
b. Automatically
After sliding power switch to ON, the LED blinks 15s, then the camera takes photos or videos when the movement is detected.
C. Interval, timer, format, and password Instruction
1.Interval, There are two part, one is sensing, the other is taking picture/video, When camera is in on mode, camera starts sensing all the
