1
Secure Start Model 28622
Add On Remote Control Car Starter Installation Instructions
v 0.2
Tools required to install the remote starter unit:
Wire Cutters/Strippers
Soldering Iron
Pliers
Testmeter Electrical tape Screwdriver
Drill
We highly recommend that all connections be soldered for reliability.
Parts List:
Remote Start Module
Control Harness
(10 position)
Parts Kit in plastic baggy:
30 A Fuse
Hood Pin Switch Set
2 Cable Ties
On/Off Control Switch
Warning Label
Ring Terminal
Wiring Diagram
WARNING
This car is equipped with a remote control starting device.
Disable before working on car!
AVERTISSEMENT
Co véhicule est équipé d’un systéme de démarrage á distance. Mettez-le hors
fonctuin avant d’eflectuer toule opération d’entretian ou de répanation!
Please Read Completely Before Beginning
Congratulations on your purchase of the Secure Start Add On Remote Car Starter. This remote car starter system allows you to
start the car by remote control from the comfort of your home or office in order to cool it down in the summer or heat it up in the
winter.
The Secure Start Remote Car Starter is for automaticl transmission vehicles only. It is an extremely sophisticated system with
multiple built-in safety and security features.
The Secure Start Remote Car Starter:
• Will start your car by remote control, and run the heater, defroster, or air conditioner to warm up or cool down the car.
• Is designed to start the car if it is in park, and only if the hood is closed.
• Will attempt to start the car for up to six seconds, but no longer (to avoid damage to the starter motor). Should the car
not start, or if it stalls after starting, the remote starter will make two further attempts to start it.
• Will not let the car be driven without the key in the ignition.
• Shuts itself off automatically after 10 or 15 minutes (programmable) if you forget to come out to your car.
• Will shut off if the brake pedal is pushed, or the hood is opened - unless the key is in the ignition and in the “run” position.
• Allows you to remove the key while leaving the car running with the doors locked for up to 10 or 15 minutes utilizing the
QUICK STOP
TM
option. (See Separate User Tip Sheet)
• Is quality engineered, microprocessor controlled, and made in the USA to provide many years of reliable use.
• Comes with a 2 year warranty.
Power Harness
Control Harness
6 Power &
Ignition wires
DesignTech International, Inc. • 7955 Cameron Brown Court • Springfield, Virginia 22153 USA • 703-866-2000 or 800-337-4468
Color
Function
Type
Required
Pink
Power (+12V)
Input
Yes
White
Accesory / Lights
Relay Output
Yes
Yellow
Starter
Relay Output
Yes
Blue
Ignition 1
Relay Output
Yes
Green
Ignition 2
Relay Output
Possible
Black
Ground
Input
Yes
Color
Function
Type
Required
Yellow/Green
Alarm Control
(+) 400 mA
No
Green/White
Sensor IN
Relay
No
Brown
Accessory Pulse
(-) 400 mA
No
Brown/White
Alarm Disable
(-) 400 mA
Possible
Gray/Black
Sensor OUT
Relay
No
Color
Function
Type
Required
Red/Black
Diesel Input
Input
No
Red/White
Remote
- Input
Yes
Green
Tach
Input
No
Violet
Hood
- Input
Yes
Orange
Brake
+ Input
Yes
LED
Plug-in Control Switch
Left
White Button
Right
Red Button
