background image

23

E N G L I S H

METAL CUTTING CIRCULAR SAW
DW934K2(H)

Congratulations!

You have chosen a D

E

WALT tool. Years of experience,

thorough product development and innovation make

D

E

WALT one of the most reliable partners for

professional power tool users.

Technical data

DW934K2(H)

Voltage

V 18

Power output

W 315

No-load speed

min

-1

3,100

Blade diameter

mm 173

Depth of cut

mm 61

Blade body thickness

mm 1.4

Blade bore

mm 20

Weight (without battery pack)

kg 3.85

Battery pack

DE9095

DE9039

Voltage

V 18

18

Capacity

Ah 2.0

3.0

Weight

kg 1.0

1.0

Charger

DE9108

DE9116

Mains voltage

V

AC

230

230

Charging time

min 60

60

Weight

kg 0.4

0.4

Fuses:

Europe

230 V tools

10 Amperes, mains

U.K. & Ireland

230 V tools

13 Amperes, in plugs

The following symbols are used throughout this manual:

Denotes risk of personal injury, loss of life

or damage to the tool in case of
non-observance of the instructions in this

manual.

 Denotes risk of electric shock.

EC-Declaration of conformity

DW934K2(H)

D

E

WALT declares that these Power Tools have been

designed in compliance with: 98/37/EEC,

89/336/EEC, 73/23/EEC, EN 50144, EN 50260,

EN 60335, EN 55014-2, EN 55014-1,

EN 61000-3-2 & EN 61000-3-3.

For more information, please contact D

E

WALT at the

address below, or refer to the back of the manual.

Level of sound pressure according to 86/188/EEC &

98/37/EEC, measured according to EN 50144:

DW934K2(H)

L

pA

(sound pressure)

dB(A)*

86

L

WA

(acoustic power)

dB(A)

99

* at the operator’s ear

Take appropriate measures for the
protection of hearing if the sound

pressure of 85 dB(A) is exceeded.

Weighted root mean square acceleration value

according to EN 50144:

DW934K2(H)

25 m/s

2

Director Engineering and Product Development

Horst Großmann

D

E

WALT, Richard-Klinger-Straße 40,

D-65510, Idstein, Germany

Summary of Contents for DW934K2(H)







Reviews: