DGT CUBE
User manual
Content
1.
Purpose
2.
Game options
3.
Use
4.
Changing settings
5.
Replacing the batteries
6.
Warranty
7.
Technical specifications
1. Purpose
The DGT Cube is a timer for (board) games with up
to 6 players. The DGT Cube can provide a time limit
for the complete game (for each player) or for each
player’s turn. This is shown on a separate display for
each player.
By applying time limits, playtime becomes easier to
control. Using the Cube provides an extra challenge
in playing various games.
This product not suitable for children under 5
years old.
Cube online
Visit www.dgtcube.com for game tips and discuss
how to use the Cube in your favorite games.
2. Game options
1.
Game timer:
Count down time per player for the
whole game.
2.
Move timer:
Count down time per player per
turn.
3.
Move timer + save:
Count down time per player
per turn. The remaining time (not used for that
turn) is saved for the next turn.
4.
Up count:
Count up time per player. Set the
game timer option to 0h 00m to activate.
5.
Turn counter:
Counts the number of
turns/points per player. Set the move-timer
option to 0m 00s to activate.
3. Use
Switch on & start
1.
Press any
to switch the Cube on.
2.
Each player chooses one side/color of the Cube.
3.
Change settings on the red side (see changing
settings) or use the current settings.
4.
When
is flashing, the Cube is ready to start.
5.
Turn the side of the starting player upward and
press
to begin.
The included colored fiches can
be placed near every player to
quickly see which side of the
cube is used by that player.
Changing turns
Change turns by rotating the side of the next player
upwards. This stops your timing and the next
players timing starts.
For this, the colored fiches can be useful!
Stop the time
The time can be stopped by placing the Cube on its
base or by pressing
.
Pausing the Cube
Press
on two sides simultaneously to pause the
Cube. Now the Cube can be rotated to take a look
at all sides. Place the desired side upward and press
to resume the game.
Switch off
Press
on the upward side for 3 seconds to
disable the Cube. Doing this will terminate the
game.
4. Changing settings
You can only change the settings immediately after
switching on the Cube. Use the buttons on the red
side to do this. You can leave the menu with the
current settings at any time by pressing
. Press
again to start the game.
General settings
1.
Choosing a game option:
Press and then to change the blinking
game option. To accept the option press .
2.
Setting the time:
Change the blinking digit with . Go to the next
digit or accept the last digit with . The time
will be set for all sides now. The maximum is 9
hours, 59 minutes
3.
Sound:
Turn the sound on or off with . With
sound activated, the Cube will alert the player by
beeping when approaching the time limit.
EN
