background image

© Digital Equipment Corporation. 1998. All Rights Reserved.

AlphaServer, AlphaStation, DIGITAL, and the DIGITAL logo are trademarks of Digital Equipment Corporation.

S3722

TM

DIGITAL AlphaServer 1000 and DIGITAL AlphaStation 600 Rackmount Installation
Information

EK-RMALP-IN. F01

June, 1998

Introduction

This installation sheet gives the necessary information to install the rackmount kit for the DIGITAL AlphaServer
1000, DIGITAL AlphaServer 1000A, and DIGITAL AlphaStation 600. Basic knowledge of installing computer
systems is presumed.

For additional information, refer to the AlphaServer 1000 Rackmount Owner’s Guide (EK-RMALP-OG), the
AlphaServer 1000A Rackmount Owner’s Guide (EK-RMNOR-OG), or the AlphaStation 600 Series User
Information
 (EK-AS800-UI).

Preparing for Installation

Table 1 lists the parts of your AlphaServer 1000/AlphaServer 1000A/AlphaStation 600 rackmount kit. Ensure that
you have all the parts before you assemble the rackmount kit.

Table 1  Parts List

Part

Description

Part Number

Qty.

   1

Front bezel, Tower

74-52719-01

   1

   2

System shelf, Tower

74-52718-01

   1

   3

Locking bracket

74-49530-01

   1

   4

Slide bracket, front right-hand (RH)

74-49532-01

   1

   5

Slide bracket, front left-hand (LH)

74-49532-02

   1

   6

Slide bracket, rear right-hand (RH)

74-49533-01

   1

   7

Slide bracket, rear left-hand (LH)

74-49533-02

   1

   8

Shipping bracket

74-49529-01

   1

   9

Interlock actuator

74-48999-16

   1

  10

Nut bar

74-49534-01

   4

  11

Concealed pull

12-40436-02

   1

  12

Pan head screw (10 mm)

90-40005-06

   2

  13

Ball Stud #10-32

90-11337-01

   2

  14

Keps nut #10-32

90-06565-00

   2

  15

Truss head screw (0.5 in long)

90-00063-39

   3

  16

Pan head screw (0.375 in long)

90-00062-23

  20

  17

Flat washer

90-06661-00

  20

  18

Helical split washer

90-06690-00

   8

  19

Hex nut #8-32

90-06561-00

   8

Summary of Contents for AlphaStation 600









Reviews: