DigiTech AT Wizard M5 Manual Download | Manualshive

Page: 1 / 11

background image

AT Wizard M5

The 5th generation of our angle & throw measuring device

The AT Wizard M5 is a measuring device for determining flap angle and flap
travels.

The display is either via the built-in display or via an app, which we provide
free of charge.

The app is only available for Android and Apple IOS systems. Normally, all
smartphones and tablets should work as long as they support the low-power
operation of Bluetooth. It should work with Bluetooth from version 2.1.

Download the app for Android or IOS. Search for the app "AT Wizard" in the
respective stores (Android or Apple) and install it. If you are asked for location
sharing permission when you first start it, please enable it. This is unfortunately
asked by Android to check if the app is enabled for the respective region.

1
2
3
...
»

Summary of Contents for AT Wizard M5












Reviews:

No comments

Related manuals for AT Wizard M5

Brand: dbx Pages: 2

Brand: Olympus Pages: 362

Brand: Olympus Pages: 8

Brand: X-Rite Pages: 50

Brand: marposs Pages: 58

Universal Analyzers 275E

Brand: Ametek Pages: 34

Brand: Topcon Pages: 59

Brand: MICRO-EPSILON Pages: 82

Brand: U.S. Solid Pages: 30

OMCL-AC240TS-R3

Brand: Olympus Pages: 3

Brand: Power Measurement Pages: 20

Brand: Omicron Pages: 76

Brand: Galileo Pages: 30

Brand: Hanna Instruments Pages: 28

miniSERIES Series

Brand: Valeport Pages: 25

Seeker 400 Series

Brand: General Pages: 24

Brand: shelyak Pages: 45

Brand: Xylem Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands