1
Attach both Hand Sanitizer Holder and Wipe Holder to the body panel by
sliding key holes down onto the two bolts. Tighten the nuts on the back.
Attach both Glove Box Holder and Mask Holder to the body panel by
sliding key holes down onto the two bolts. Tighten the nuts on the back.
Thread standoffs through all 6 holes along edges. Thread bolts through any
holes in the body and attach nut to back side.
Health and Safety Panel (1)
Attach sign holder to the top of the body panel by sliding key holes down
onto the bolt. Tighten the nut on the back.
3
Standoffs (6)
Nuts and Bolts (9)
8.5” x 11” Sign Holder
(1)
RPHLTH
–
Wall Mounted Health & Safety/Hygiene Station v21.05
Hand Sanitizer Holder (1)
