background image

DLE130

 

Users Manual

 

 

 

SAFETY NOTICE

 

This engine is not toy. For your own safety, please read the manual carefully before oper-

ation. Never allow children under the age of 18 to operate this engine without supervi-

sion. You are responsible for the safe operation of this engine.

 

Before every use, check the engine assembly, propeller and airframe carefully for loose 

screws and nuts. Loctite 242 Blue (or similar) is strongly recommended on all the screws. 

 

Summary of Contents for 130

Page 1: ...r ation Never allow children under the age of 18 to operate this engine without supervi sion You are responsible for the safe operation of this engine Before every use check the engine assembly propeller and airframe carefully for loose screws and nuts Loctite 242 Blue or similar is strongly recommended on all the screws ...

Page 2: ...ow anyone including yourself to be in front of or to the sides of the propeller when starting or running the engine Anyone near the engine should wear protective eyewear NEVER WEAR LOOSE CLOTHING near the engine or propeller SPECIFICATIONS 13HP 8500rpm Idle Speed 1300 rpm min Static Thrust 28 5Kg 100 meters Altitude Static Thrust 24 5Kg 1800 meters Altitude Recommended propeller 27x12 28x12 28x10 ...

Page 3: ...gine stumbles when the throttle is advanced the mixture is likely too rich High Speed Adjustment The High Speed needle adjusts the mid and high RPM mixture setting Best prac tice is to set the high speed needle to achieve maximum RPM and then open an 1 8 of a turn to allow for altitude If ever the engine slows or stops while at full throttle the high speed mixture is most likely too lean In this s...

Page 4: ...ecome erratic check the fuel line for possible pin holes or air leaks NOTICE The carburetor fuel screen should be cleaned periodically Carefully remove the pump cover inlet side of the carburetor gasket and pump membrane The screen will be visible and can be cleaned WARRANTY INFORMATION All the DLE engines enjoy one year parts and labour warranty when run as per factory instructions used with spec...

Reviews: