Quick Reference Guide CMT-6 (v2)
DOKKi
.eu
Legal Notices
This manual and any examples contained herein are provided "as is". JNC makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability, non-infringement and fitness for a particular purpose. JNC shall
not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this
manual or the examples contained herein.
Reproduction, adaptation or translation of this manual is prohibited without prior written permission of JNC Service B.V.
CAUTION: This Quick Reference Guide may be revised or withdrawn at any time without prior notice.
This document provides basic usage instructions and information on setting up your DOKKi docking station.
UNPACKING
Do NOT use a knife to open the package or contents as this may result in damaging the product(s)
Open the outer box on the top-side. Take the docking station from it's box and remove the bubble-foil.
BOX CONTENTS
•
CMT-6 v2 docking station
•
power adapter
•
USB cable
Promotional items aren't listed here.
The CMT-6 (v2) will fit Opticon scanner models OPN-2001, OPN-2005 and OPN-2006.
Always check our website for the latest list of models that fit if your model isn't listed here.
The insertion area is as tight as possible to ensure stability for the OPN scanner. That also means that the OPN won't fit any more when
used in combination with any available OPN sleeve or case (rubber, leather, etc.).
See our SPC model docks (like the CMT-6SPC and CMT-30SPC) for applications where a protective case is required. This line of docks is
specifically designed to operate the OPN scanners with our SPC-2-xxx cover installed.
Other models (for example the OPN-2002, OPN-2003 and OPN-2004) won't fit.
Trying to insert unlisted models will result in damage to the CMT-6 v2 and other scanner model!
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CMT-6 v2_QRG-002
Powered CMT-6 v2 with OPN2001's & OPN2006’s
