background image

dom-security.com

ELS/ENiQ® signalling

1

All devices generate both a visual and an acoustic signal. 
The small speaker  

stands for a short beep tone. 

The large speaker  

stands for a long beep tone. 

Exception: PRO only generates a visual signal.

i

Normal operation .........................................................................................................................................2

System ............................................................................................................................................................2

Special functions ..........................................................................................................................................6

Other ...............................................................................................................................................................8

Signalling for the LoQ ................................................................................................................................10

Signalling for the wall reader only ..........................................................................................................11

Signalling for the RF NetManager only ...................................................................................................11

Summary of Contents for ELS signalling















Reviews: