background image

74528

  A DIVISION OF DOUGLAS DYNAMICS, LLC

 CAUTION

Use standard methods and practices when  

attaching snowplow and installing accessories,  

including proper personal protective safety 

equipment.

 CAUTION

Read this document before installing the 

blade stop kit.

 WARNING

Do not exceed GVWR or GAWR, including 

blade and ballast. The rating label is found on 

the driver-side vehicle door cornerpost.

Blade Stop Kit

PARTS LIST

74528  Blade Stop Kit

Item

Part

Qty Description

Item

Part

Qty Description

1

74523

2

Outrigger

ns

11809

1

Bolt Bag

2

74527

2

On-Blade Bracket

11809  Bolt Bag

3

2

3/8-16 x 3 Hex Cap Screw G8

5

16 3/8 Flat Washer SS

4

6

3/8-16 x 4 Hex Cap Screw G8

6

8

3/8 x 16 Hex Locknut GB

 

ns = not shown 

G = Grade

May 1, 2020

Lit. No. 74520, Rev. 00

1

6

2

3

4

4

5

5

5

6

6

Summary of Contents for Western 74528

Page 1: ...WR or GAWR including blade and ballast The rating label is found on the driver side vehicle door cornerpost Blade Stop Kit PARTS LIST 74528 Blade Stop Kit Item Part Qty Description Item Part Qty Description 1 74523 2 Outrigger ns 11809 1 Bolt Bag 2 74527 2 On Blade Bracket 11809 Bolt Bag 3 2 3 8 16 x 3 Hex Cap Screw G8 5 16 3 8 Flat Washer SS 4 6 3 8 16 x 4 Hex Cap Screw G8 6 8 3 8 x 16 Hex Locknu...

Page 2: ... in rearward position 4 Tighten the fasteners to 31 ft lb 5 Repeat on the other side INSTALLATION INSTRUCTIONS Park the vehicle on a smooth level hard surface such as concrete Lower the blade to the ground and turn the control OFF Disconnect the snowplow from the vehicle or turn the vehicle ignition to the OFF position and remove the key Outrigger to T Frame 1 Determine which outrigger mounting ho...

Page 3: ... Blade 1 On one blade wing align an on blade bracket with the mounting holes on blade rib as shown 2 Insert two 3 8 x 4 cap screws with 3 8 washers through the bracket and rib mounting holes Add another washer and a 3 8 locknut on each fastener as shown 3 Tighten the fasteners to 31 ft lb 4 Repeat on the other blade wing ...

Page 4: ...pany s outlets or snowplow owner is granted The company reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used This equipment manufacturer or the vehicle manufacturer may require or recommend optional equipment for snow removal Do not exceed vehicle ratings with...

Reviews: